Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
36 inch KV255 pilaster standard from Knape and Vogt is a steel shelf standard that creates an adjustable support track for shelving in cabinets, closets, or storage runs. The standard is 5/8 inch wide and 3/16 inch deep, so it fits easily along stile edges or case sides without taking much interior space while still giving a defined track for brackets. The steel standard is made from 23-gauge high strength steel, which provides a rigid mounting spine for shelf supports and helps the system handle demanding storage loads when used appropriately. The brass look finish gives the standard a brass-like appearance, which helps it blend into traditional or warm-toned interiors where exposed hardware needs a coordinated look. This model is BHMA Grade 1 compliant, so it follows a recognized performance standard that supports use in higher traffic or heavier duty shelving applications.
The KV255 brass look pilaster standard uses slots that are adjustable in 1/2 inch increments, so shelf supports can be stepped up or down in half-inch steps to fine-tune shelf height across a run. Pre-drilled screw or nail holes are spaced 6 inches apart on center along the standard, which simplifies fastener placement and promotes a consistent attachment pattern along the cabinet or wall surface. Recommended fasteners are KV255-8 nails, sold separately, so installers can match the standard with a nail sized for the factory hole pattern and material, which helps speed installation in production settings. The 36 inch length offers a practical size for many cabinet interiors, because it lets installers start near the bottom and still reach typical upper shelf positions without cutting the standard down.
This Knape and Vogt steel shelf standard is part of the shelf standards and brackets class and is used with supports that engage its slots to form adjustable shelving systems in closets, cabinets, and other storage. The 36 inch length makes it suitable for medium-height cases and closet sections where several adjustable shelves are needed within a limited vertical span. The 5/8 inch wide profile allows the standard to be set close to the cabinet front or back edges while preserving shelf width, which is useful in tight interior dimensions. The brass look finish can be used in residential or commercial projects where the standard may be visible along the interior side panels and needs to coordinate with brass-toned hinges, pulls, or rods. Because this model is part of the KV255 line, it aligns with the stated series dimensions and slot pattern, supporting system planning across other available lengths.
The slots on this adjustable shelf standard are set in 1/2 inch increments, which gives installers the ability to align shelves precisely from one side of a cabinet to the other simply by using the same stamped numbers on each standard. The stamped numbers along the steel track act as built-in reference marks, helping maintain level shelf placement over multiple units and reducing layout time when repeating a design. Pre-drilled screw or nail holes at 6 inches on center encourage a regular fastening pattern down the length of the standard, which supports stable attachment and consistent pull-out resistance across the installation. The 23-gauge high strength steel material resists deformation along the slot edges as supports engage, which helps retain a predictable fit for brackets over repeated adjustments. BHMA Grade 1 compliance connects the standard to a recognized industry performance level, which matters in projects where shelving may be reconfigured frequently or subjected to heavier loading conditions typical of organized storage and closet systems.
The 255 BR 36 pilaster is 36 inches long, 5/8 inch wide, and 3/16 inch deep, so it occupies minimal space while providing a defined track for adjustable shelf supports.
The KV255 brass look standard uses 23-gauge high strength steel, giving the shelf support track rigidity and helping it hold up in demanding storage and closet applications.
The KV255 adjustable shelf standard has support slots in 1/2 inch increments, which lets installers fine-tune shelf height and keep multiple shelves aligned across a run.
The KV255 stamped numbers give quick visual references for bracket locations, so shelf heights can be matched between left and right standards without repeated tape measurements.
The 255 BR 36 pilaster has pre-drilled screw or nail holes 6 inches apart on center, creating a consistent fastening pattern for mounting along cabinet sides or walls.
The 36 inch KV255 brass look pilaster lists KV255-8 nails, sold separately, as the recommended fasteners, pairing the factory holes with nails sized for this standard.
The Knape and Vogt 255 BR 36 pilaster standard combines a 36 inch length, 5/8 inch by 3/16 inch steel profile, 1/2 inch slot adjustments, and stamped numbers to support accurate, repeatable shelf layouts. The brass look finish and BHMA Grade 1 compliance position this KV255 shelf standard for projects that need both appearance coordination and durable, adjustable shelving. For cabinet, closet, or storage runs built around the KV255 system, this brass look 36 inch pilaster provides a straightforward track for supports using a familiar Knape and Vogt layout pattern.
Sold In: 1 Each
