Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KV255 heavy-duty steel pilaster standard gives installers a 96 inch vertical track for building adjustable shelving runs. The 5/8 inch wide by 3/16 inch deep profile fits tight spaces while still supporting standard shelf brackets in closet, cabinet, or storage layouts. Steel standards made from 23-gauge high strength steel provide a robust mounting backbone along the stud line, which supports repeated shelf reconfiguration in service. The zinc finish on this Knape and Vogt standard offers a neutral, corrosion-resistant surface that works cleanly in utility, shop, or back-of-house environments. BHMA Grade 1 compliant construction means the standard is engineered to meet demanding commercial performance criteria, which matters when shelving will be actively loaded and adjusted over time. Stamped numbers along the standard give a clear reference for bracket positions, which speeds field layout and helps keep multiple standards aligned for level shelving.
The KV255 Knape and Vogt shelf standard uses adjustable slots set in 1/2 inch increments, so shelf brackets can be repositioned quickly while maintaining consistent heights between standards. Pre-drilled screw or nail holes spaced 6 inches on center give a ready-made fastening grid, which helps align the standard with framing members or cabinet sides without separate layout marks. The 5/8 inch width keeps the standard narrow on the wall or panel, while the 3/16 inch depth keeps the profile shallow, which simplifies fitting alongside trim, cleats, or case interiors. Stamped numbers on the face turn each slot into a repeatable reference point, which is useful when documenting bracket heights or matching existing layouts during retrofit work.
The 96 inch KV255 heavy-duty steel pilaster standard suits tall storage projects where continuous adjustment is needed from low to high positions. In closet runs, the full 96 inch length supports hanging shelves and stacked storage without needing multiple shorter standards, which helps keep slot spacing consistent from top to bottom. In shop, garage, or back-room shelving, the BHMA Grade 1 compliant design suits heavier, frequently handled loads, where shelf heights may change as inventory or tooling evolves. The zinc finish works well in utility areas, providing a metallic surface that coordinates with typical shop fixtures while resisting typical indoor moisture and handling. At 5/8 inch wide by 3/16 inch deep, the standard seats cleanly along cabinet sides or wall substrates without consuming excessive lateral space, which is useful when shelving is tight to door openings or adjacent fixtures.
The 1/2 inch slot increments on the KV255 shelf standard allow installers to fine-tune shelf heights while still keeping an easy mental reference for dimensions, which simplifies coordinating clearances above appliances, bins, or hanging items. Stamped numbers along the standard tie directly to those slot positions, so teams can call out bracket locations by number, which reduces miscommunication between layout, fabrication, and on-site installation. Pre-drilled screw or nail holes at 6 inches on center form a predictable fastening pattern that lines up efficiently with typical 16 inch or 24 inch stud spacing, which helps balance load transfer across the wall structure. The 23-gauge high strength steel construction gives the standard a slim profile while maintaining the rigidity expected of a heavy-duty component in a shelf standards and brackets system. The 96 inch continuous length avoids mid-span breaks where misalignment can occur, which helps keep long shelf runs straight and reduces rework after loading. The manufacturer part number 255 ZC 96 clearly identifies this specific zinc finish, 96 inch version within the KV Model KV255 family, which simplifies reordering or matching existing installations during expansions.
The KV255 heavy-duty steel pilaster standard is 96 inches long, 5/8 inch wide, and 3/16 inch deep, so it provides a tall yet slim mounting track for adjustable shelving layouts.
The KV255 standard uses slots adjustable in 1/2 inch increments, allowing precise shelf height changes while keeping consistent alignment between multiple standards in a run.
The BHMA Grade 1 compliant rating indicates the KV255 standard is designed for demanding applications, supporting heavy-duty shelving where frequent adjustment and loading are expected.
Stamped numbers give a clear reference for each bracket position, so installers can quickly match shelf heights across standards and record locations for future adjustments.
The KV255 standard has pre-drilled screw or nail holes spaced 6 inches on center, creating a regular pattern to fasten into studs or structural cabinet members.
Model 255 ZC 96 is a steel standard made from 23-gauge high strength steel with a zinc finish, providing a strong, slim track with a neutral metallic appearance.
The 96 inch KV255 heavy-duty steel pilaster standard in zinc finish gives professional installers a tall, slim, BHMA Grade 1 compliant track for adjustable shelving using Knape and Vogt components. The 5/8 inch wide by 3/16 inch deep profile, 1/2 inch slot increments, stamped numbers, and pre-drilled 6 inch on-center fastening pattern all support efficient layout work and repeatable shelf alignment. When a project calls for reconfigurable storage using steel shelf standards and brackets, this 255 ZC 96 model provides a clearly defined, high-strength option that aligns with demanding commercial or workshop environments.
Sold In: 1 Each
