96" KV255 Heavy-Duty Aluminum Pilaster Standard, Brass Look Finish 50/Box

96 Inch KV255 Aluminum Pilaster Standard For Adjustable Shelves

96 inch KV255 aluminum pilaster standard gives you a full-length shelf standard for tall cabinet or closet runs where continuous adjustment is important. The 96 inch length works well in full-height installations so shelves can be set at practical levels along the entire opening. The brass look finish provides a brass-style appearance, which helps the standard blend with warm-toned cabinetry and trim in visible installations. The 5/8 inch wide by 3/16 inch deep profile keeps the standard slim on the cabinet side, helping preserve usable interior width for shelving while still supporting the bracket system. Being part of the KV255 model line ties this standard to a recognized shelf standards and brackets system, which helps keep installations consistent when matching to other locations that use the same model family.

Key Knape And Vogt 255AL BR 96 Working Advantages

• The 17-gauge aluminum material used for this standard delivers a heavy-duty pilaster profile, so it resists bending under typical shelf loads in cabinet, closet, or storage layouts.
• BHMA Grade 1 compliance means this standard meets a high performance level for shelf standards, which supports demanding commercial or residential applications that see regular shelf adjustments and use.
• Slots for supports are adjustable in 1/2 inch increments, allowing shelf heights to be dialed in closely so stored items fit efficiently without wasting vertical space between shelves.
• Stamped numbers along the standard assist during layout and installation, helping installers align bracket positions accurately between left and right standards to keep shelves level.
• Pre-drilled screw or nail holes spaced 6 inches apart on center provide a predictable fastening pattern, which speeds layout on cabinet sides and helps the standard pull tight to the mounting surface.
• Availability in multiple lengths from 12 inch to 96 inch helps keep projects consistent, because shorter or taller cases can use the same KV255 profile while matching the 96 inch runs.

Mounting And Adjustment Details For KV255 Standards

The pre-drilled screw or nail holes every 6 inches on center let this 96 inch KV255 aluminum pilaster standard mount with a regular fastener pattern, which keeps the standard tight to the cabinet or wall surface along its length. The 5/8 inch width and 3/16 inch depth define a compact mounting footprint, which matters when laying out rows of standards on narrow cabinet sides or face-framed interiors. Slots for supports adjustable in 1/2 inch increments give fine control over shelf height, so installers can match existing layouts or design new storage patterns that fit specific items. The stamped numbers along the standard assist in quickly matching shelf levels between multiple standards in a run, which helps reduce rework from uneven shelves.

Using The BHMA Grade 1 KV255 Pilaster In Real Projects

Where This 96 Inch Brass Look Standard Fits Best

The 96 inch KV255 heavy-duty aluminum pilaster standard in brass look finish suits full-height shelf, closet, and storage layouts where continuous vertical adjustment is needed. Its 96 inch length covers tall cabinet interiors or closet sides in a single piece, which helps avoid alignment issues that can appear when stacking shorter standards. The brass look finish coordinates with brass-toned hardware and warm wood finishes, supporting visible installations such as built-ins or open shelving. As part of a shelf, closet & garage organization line in the shelf standards & brackets class, this standard fits projects that rely on adjustable brackets to carry shelving across multiple spans. The 17-gauge aluminum construction keeps weight manageable during handling while still providing the heavy-duty profile specified for the KV255 aluminum standards.

Details That Support Consistent Shelf Layout And Results

The adjustable shelf standard 1/2 inch slots let installers shift supports in half-inch steps, creating repeatable shelf spacing across a bank of cabinets or along a closet wall. This matters when aligning shelf heights to fixed elements such as hanging rods or countertop edges. Stamped numbers on the KV255 stamped number standards provide a simple visual reference for bracket positions, which helps crews communicate positions and duplicate layouts on mirrored or opposite walls without measuring each location. The pre drilled pilaster screw holes spaced every 6 inches simplify marking on cabinet sides, because the pattern is set by the standard rather than separate layout lines. The 5/8 wide pilaster standard and 3/16 inch depth make the profile predictable when planning clearances for doors, face frames, or adjacent panels, which supports smoother installation sequences. BHMA Grade 1 shelf standard performance and 17-gauge aluminum construction give this model a defined role in demanding storage builds where repeated shelf changes and sustained loading are expected.

Installer Questions About The 96 Inch KV255 Pilaster Standard

Selecting This KV255 Standard For Adjustable Storage Runs

The 96 inch KV255 heavy-duty aluminum pilaster standard in brass look finish provides a full-height, BHMA Grade 1 compliant shelf standard with 1/2 inch adjustment increments and stamped-number guides. For adjustable storage runs needing a slim 5/8 inch wide profile, this 17-gauge aluminum standard offers a defined mounting pattern with 6 inch on-center screw or nail holes. For projects calling for the Knape and Vogt 255AL BR 96 model, this KV255 heavy duty shelf standard aligns with the KV255 system dimensions and appearance across multiple cabinet or closet locations.