Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3/4" KV256 steel shelf support clip gives a defined support point for shelves, so closet and cabinet layouts using KV255 pilasters have a repeatable bearing surface from one opening to the next. The Knape and Vogt 256 WAL part number identifies this specific steel shelf clip in walnut finish, which ties directly to standardized layouts that reference KV256 hardware. The BHMA Grade 1 performance rating when used with KV255 pilasters signals a clip built and tested for demanding load and duty cycles in professional shelving systems. The 5/8 inch width and 3/4 inch length define the bearing footprint at the shelf edge, helping installers size drilling locations and shelf depth clearances to work with KV255 pilaster channels. The walnut finish visually matches walnut-toned systems so exposed supports blend with shelving components.
This KV256 steel shelf support clip is specified for use with KV255 pilasters, so it slots into shelving standards already laid out for the KV255 system. The defined 5/8 inch width and 3/4 inch length give a clear bearing area that aligns with typical shelf edge positioning relative to the pilaster channel, which simplifies repeating the same shelf locations through a run of cabinets. The BHMA Grade 1 rating when used with KV255 provides confidence that the clip and pilaster pairing is engineered for repeated shelf repositioning in active residential or commercial storage installations.
The Knape and Vogt 3/4 inch KV256 steel shelf support clip in walnut finish is used wherever KV255 pilasters are specified for adjustable shelving. Because it is explicitly described for use with KV255 pilasters, it aligns with that pilaster profile in closet systems, cabinet interiors, or storage runs that rely on the KV255 standard to set vertical adjustment increments. The BHMA Grade 1 performance when paired with KV255 makes this clip suited to high-use shelving where users regularly shift shelf positions, such as in closets, pantries, or storage cabinets built around KV255 channels. The 5/8 inch wide by 3/4 inch length geometry defines the contact zone at each shelf corner or side support location, so designers can coordinate shelf thickness and edge overhang to rest squarely on the clip without guessing at the bearing footprint.
The stated 5/8 inch width and 3/4 inch length are critical because they determine how the KV256 shelf support clip engages the underside of the shelf, which affects how cleanly loads transfer into the KV255 pilaster. With a consistent footprint, installers can repeat the same drilling and layout pattern across multiple cabinets or closet bays using the KV255 standard, reducing rework when adding or moving shelves. The BHMA Grade 1 designation when used with KV255 pilasters indicates a shelf clip and pilaster pairing engineered for demanding use, so adjustable shelves in KV255-based systems retain their support characteristics over time. The walnut finish matters where the clip is visible along open shelving runs, letting the support match walnut-colored shelves and trim so the hardware does not distract from the finished appearance.
The 3/4" KV256 steel shelf support clip is described for use with KV255 pilasters, so it fits shelving layouts built around the KV255 pilaster standard.
The KV256 clip size defines a predictable shelf bearing footprint, which helps installers position shelf edges and drilling patterns to match KV255 pilaster channels.
The BHMA Grade 1 reference for the KV256 clip when used with KV255 pilasters indicates a performance level suited to demanding, high-use shelving applications.
The walnut finish on the KV256 steel shelf support clip lets the hardware visually coordinate with walnut-toned shelves and pilasters in finished installations.
Used with KV255 pilasters, the KV256 steel shelf clip provides repeatable support points at each adjustment position, helping shelves stay aligned as they are repositioned.
The manufacturer part number for this Knape and Vogt steel shelf support clip in walnut finish is 256 WAL, which identifies this specific KV256 component.
The 3/4" KV256 steel shelf support clip in walnut finish ties directly to KV255 pilasters, giving installers a defined support component for adjustable shelving systems built on that standard. Using a BHMA Grade 1 rated clip and pilaster pairing helps shelving in active residential or commercial spaces retain consistent support as shelves move. The 5/8 inch wide by 3/4 inch length footprint sets a clear bearing zone under each shelf, so layouts using KV255 channels can be repeated confidently across multiple openings. Choose the Knape and Vogt 256 WAL part whenever a walnut-finished KV256 shelf support is required to match KV255-based designs.
Sold In: 1 Each
