Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KV255 heavy-duty steel pilaster standard is a Knape and Vogt shelf standard designed to support adjustable shelving runs where consistent spacing and strength are needed. The 60 inch length gives installers a full 5 foot run to work with, which suits many cabinet, closet, or storage layouts without splicing shorter pieces. The standard is made from 23-gauge high strength steel, so it provides a solid backbone for shelf supports in typical woodworking and storage projects. A brass look finish gives the steel standard a brass-colored appearance that coordinates with brass-toned hardware and trim for a unified visual line along cabinet interiors or wall runs. At 5/8 inch wide by 3/16 inch deep, the standard has a slim profile that sits close to the mounting surface, which helps keep shelves tight to walls or cabinet sides while still giving room for shelf supports to lock into the slots. BHMA Grade 1 compliant construction means the standard meets a recognized performance level, which matters when building adjustable shelving expected to handle regular repositioning over time.
The KV255 shelf standard uses pre-drilled holes spaced 6 inches apart on center, so fastening can follow a regular pattern up the run without layout work at every hole. This supports efficient installation along cabinet sides or framing members when repeating the same fastening rhythm. The 5/8 inch width offers enough bearing surface for mounting to typical case sides while staying narrow enough to fit in tight interior spaces. A 3/16 inch depth keeps the standard low-profile, which lets shelf brackets engage while still maintaining clearance in shallow cabinets. Slots that accept supports at 1/2 inch increments allow the installer to adjust shelf height in small steps, which helps fine-tune clearances above drawers, rods, or stored items without redesigning the case.
This 60 inch KV255 heavy-duty steel pilaster standard works well anywhere a 5 foot vertical track supports multiple adjustable shelves along a cabinet or wall. The 5/8 inch wide by 3/16 inch deep profile fits typical cabinet side panels, allowing the standard to mount inside kitchen, bath, or storage cabinetry while using the same slot interface from top to bottom. Brass look finish coordinates with brass-colored hinges, pulls, or rods, so the vertical standards visually match other hardware when cabinet interiors remain visible. Available lengths across the KV255 line range from 12 inches to 96 inches, which allows this 60 inch version to be used alongside shorter or longer runs in the same project when different cabinet heights or wall sections are present.
KV255 adjustable shelf standard slots set at 1/2 inch increments let installers repeat shelf heights from one cabinet or bay to the next simply by matching stamped numbers, which reduces layout variation across a project. Stamped numbers along the standard provide a built-in indexing system, so both sides of a shelf can be set to the same level without measuring each bracket position, helping avoid uneven or tilted shelves. The pre-drilled screw or nail holes spaced 6 inches apart on center establish consistent fixation points, which aids in building a regular fastening pattern that is easy to repeat from unit to unit on a job. Recommended fasteners KV255-8 nails connect directly to the standard, which ties the specified nail to this model so fastener selection stays aligned with the manufacturer's guidance. Steel standards built from 23-gauge high strength steel provide a durable track for frequent shelf adjustments, supporting repeat use in residential or commercial storage where loads and layout may change over time.
The KV255 heavy-duty steel pilaster standard has a 60 inch length, giving a continuous 5 foot vertical run for supporting multiple adjustable shelves along a cabinet side or wall section.
The standard measures 5/8 inch wide by 3/16 inch deep, so it sits close to the mounting surface while leaving enough profile depth for shelf supports to lock into the slots.
The KV255 pilaster standard has slots adjustable in 1/2 inch increments, allowing fine-tuned shelf height changes to match storage needs or design dimensions without large jumps.
The KV255 heavy-duty steel pilaster standard lists KV255-8 nails as the recommended fasteners, tying the nail type directly to the standard for mounting to suitable substrates.
The pilaster standard uses pre-drilled screw or nail holes spaced 6 inches apart on center, creating a regular fastening pattern along the length for even pull-down and straightforward installation.
The KV255 standard is made from 23-gauge high strength steel and is BHMA Grade 1 compliant, providing a strong, performance-rated track for adjustable shelving applications.
This 60 inch KV255 heavy-duty steel pilaster standard in brass look finish gives professional installers and serious DIY users a BHMA Grade 1 compliant, 23-gauge steel track for adjustable shelving. The 5/8 inch wide by 3/16 inch deep profile, 1/2 inch slot increments, and 6 inch on-center pre-drilled holes support straightforward layout and reliable shelf alignment. For projects calling for a brass-toned, adjustable Knape and Vogt shelf standard across cabinet interiors or wall systems, this KV255 model aligns well with repeatable installations.
Sold In: 1 Each
