Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KV255 heavy-duty steel pilaster gives you a 24 inch Knape and Vogt shelf standard built for repeatable, adjustable shelving layouts. This KV Model KV255 standard measures 5/8 inch wide by 3/16 inch deep, so it fits neatly along cabinet sides or closet panels without taking excess space. The brass look finish provides a brass-look appearance, which supports jobs that call for a warm metal tone on exposed standards. BHMA Grade 1 compliance ties this standard to a high-duty commercial performance grade, which matters when shelving will handle frequent adjustment or heavier use. The standard is made from 23-gauge high strength steel, so the vertical track resists bending during installation and service. Available lengths go from 12 inch through 96 inch, which lets you match shorter cabinet runs or full-height closet and storage walls with the same KV255 system.
The 24 inch length on this 255 BR 24 pilaster standard works well for mid-height cabinets or shorter closet sections, so the track can span the full usable interior without waste. Pre-drilled screw or nail holes spaced every 6 inches on center give a direct fastening pattern, which helps installers tie into studs or panel material at repeating intervals. Slots sized for KV supports and adjustable in 1/2 inch increments let brackets engage firmly, helping shelves stay seated under loading and repositioning. The narrow 5/8 inch by 3/16 inch profile keeps the standard close to the mounting surface, which reduces interference with shelf contents while still giving a clear vertical reference line.
This 24 inch KV255 heavy-duty steel pilaster suits cabinet interiors where shelf adjustment is needed without committing to fixed pins. In a kitchen or utility cabinet, the 5/8 inch by 3/16 inch profile lets the standard sit tight to the side panel, which leaves more clear width for pull-outs, bins, or folded items. The brass look finish allows this standard to sit in visible areas where a brass-look tone complements hinges or pulls. Available lengths from 12 inch up to 96 inch keep the same slot geometry across short and tall runs, which streamlines layout when a project mixes base cabinets and full-height storage. BHMA Grade 1 compliance matches projects that lean toward commercial or heavy-use environments, because the grading ties directly to a recognized performance category.
Slots for supports adjustable in 1/2 inch increments let you move brackets up or down in tight steps, which helps align shelves to appliance heights, binders, or storage bins without large jumps. Stamped numbers along the KV Model KV255 standard act like a built-in measuring tape, so left and right standards can be matched by number instead of relying on separate marks. This reduces the chance of racking between shelf ends on longer spans. Pre-drilled holes every 6 inches on center guide screw or nail placement, helping fasteners land in consistent positions along the stud or panel and reducing layout time across a bank of cabinets. The 23-gauge high strength steel construction keeps the standard rigid as it is held to the surface for fastening, which supports straighter installations and consistent bracket engagement over the full 24 inch run.
The KV255 heavy-duty steel pilaster is 24 inches long and measures 5/8 inch wide by 3/16 inch deep, which lets it sit close to cabinet or closet sides while still guiding shelf supports.
The slots for supports adjust in 1/2 inch increments, so shelf height can be tuned in small steps. This helps align shelves precisely with stored items or architectural lines.
This BHMA Grade 1 shelf standard meets a high-duty performance grade, which supports applications where shelves will be adjusted often or carry heavier loads in regular use.
The 255 BR 24 pilaster uses 23-gauge high strength steel, giving the standard rigidity during fastening and helping it resist bending once loaded with shelves and contents.
Pre-drilled screw or nail holes 6 inches apart on center provide a ready-made fastening pattern, which can reduce layout work and keep fasteners aligned across multiple standards.
The brass look finish provides a brass-look appearance, which suits projects where exposed standards need to coordinate with brass-tone hinges, pulls, or other visible hardware.
This 24 inch KV255 heavy-duty steel pilaster standard from Knape and Vogt offers BHMA Grade 1 compliant performance, 5/8 inch by 3/16 inch dimensions, and 1/2 inch slot adjustment, giving you a predictable track for adjustable shelves. With 23-gauge high strength steel construction, stamped numbers, and pre-drilled holes 6 inches on center, the 255 BR 24 model supports efficient layout and installation across cabinet, closet, or storage projects where brass look finish is part of the design.
Sold In: 1 Each
