72" KV255 Heavy-Duty Aluminum Pilaster Standard, Brass Look Finish 50/Box

KV255 Heavy-Duty Aluminum Pilaster For Adjustable Shelves

KV255 heavy-duty aluminum pilaster is a 72 inch Knape and Vogt shelf standard designed to support adjustable shelving runs in closets, cabinets, or storage layouts that benefit from vertical standards. The 17 gauge aluminum standard provides a strong, rigid track that helps support shelf brackets along the full 72 inch length. The 5/8 inch wide by 3/16 inch deep profile keeps the pilaster slim, so it fits neatly along cabinet sides or wall panels without taking excessive space from the opening. The brass look finish gives the aluminum standard a warm appearance that coordinates with brass-tone hardware or trim where visible installations are important. This model follows the KV255 design, so it integrates into layouts planned around the KV255 series dimensions and slot pattern. As a 72 inch size within the available length range, it works in full-height cabinets or tall closet sections where continuous adjustment is useful.

Key KV255 Pilaster Details That Support Jobs

• The 17 gauge aluminum construction creates a high-strength standard, which helps the pilaster handle heavy-duty shelf loads while maintaining straight alignment over the 72 inch length in typical cabinet or closet use.
• The 5/8 inch width and 3/16 inch depth keep the profile compact, allowing the pilaster to sit close to the cabinet wall so shelf clear openings remain as wide as the design allows.
• The brass look finish provides a brass-tone appearance on the aluminum body, which helps the standard visually match brass colored shelf supports or surrounding decorative hardware in exposed installations.
• Slots for supports are adjustable in 1/2 inch increments, so shelf brackets can be positioned in fine vertical steps to match measurement layouts or to align shelf heights with doors, trim, or other interior components.
• Stamped numbers along the standard provide visual reference points, which simplifies setting multiple standards to the same bracket heights and helps reduce measuring time during layout.
• Pre-drilled screw or nail holes spaced 6 inches on center give a regular fastening pattern, helping installers anchor the pilaster consistently along studs or cabinet sides using nails or screws suited to the substrate.

KV255 Pilaster Mounting And Fastener Details

The 72 inch KV255 aluminum pilaster uses pre-drilled screw or nail holes spaced 6 inches on center, which guides a regular fastening pattern along walls or cabinet gables for consistent support. Recommended fasteners are KV255-8 nails, so the standard is designed with a fastening option that matches its hole layout and material. Slots for supports adjust in 1/2 inch increments along the length, allowing shelf brackets to be located precisely as leveling or design requirements dictate. The 5/8 inch wide by 3/16 inch deep section seats closely against wood or panel substrates, helping the fasteners clamp the pilaster securely without a bulky projection into the storage space.

Using The 72 Inch KV255 Pilaster In Shelf Runs

Where This 72 Inch Aluminum Pilaster Fits Best

The 72 inch KV255 heavy-duty aluminum pilaster standard fits tall cabinet interiors, pantry sections, or closet uprights that use vertical standards to carry shelf brackets. Because the pilaster is 72 inches long, it can span a large portion of a cabinet side or wall, giving multiple bracket positions from near the base to higher storage levels. The 5/8 inch width is narrow enough for face-frame or frameless cabinet sides where available interior width is valuable, while the 3/16 inch depth keeps the pilaster close to the mounting surface. BHMA Grade 1 compliance indicates the standard is manufactured to a performance level recognized in the industry, supporting use in projects where tested hardware grades are specified. The brass look finish works in installations where the standard may be seen inside open shelving or glass-door cabinets, letting the hardware blend with brass-tone pulls, hinges, or other visible components.

How KV255 Details Support Consistent Shelf Alignment

The KV255 slot pattern with 1/2 inch vertical increments allows shelf supports to move in small steps, which helps installers fine-tune shelf heights to match clearances for stored items or to align with fixed features such as drawers. Stamped numbers along the pilaster create clear reference marks so opposing standards can be set to identical bracket positions, reducing the risk of out-of-level shelves when laying out multiple bays. Pre-drilled screw or nail holes spaced 6 inches on center give a repeated fastening rhythm, which helps maintain straight alignment of the standard from top to bottom as it is secured. Using recommended KV255-8 nails ties directly to the hole pattern, so each nail location is coordinated with the design of the 17 gauge aluminum section. The strength of the heavy-duty aluminum section supports shelf loads across the 72 inch run, contributing to stable bracket support over time in typical shelving applications.

Common Questions About The KV255 Aluminum Pilaster

Selecting The 72 Inch KV255 Pilaster For Projects

The 72 inch KV255 heavy-duty aluminum pilaster standard from Knape and Vogt combines 17 gauge aluminum construction, BHMA Grade 1 compliance, 1/2 inch bracket adjustment, and brass look finish in one component, giving shelving projects a tested track for adjustable shelves. The 5/8 inch wide by 3/16 inch deep profile, pre-drilled 6 inch on-center holes, stamped numbers, and recommended KV255-8 nails work together to support straightforward layout and fastening in tall cabinets or closet runs where adjustable shelving is planned.