Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KV255 heavy-duty aluminum pilaster standard defines this Knape and Vogt 60 inch standard as part of the KV255 system, so it drops into jobs that are already laid out around that model line. The 60 inch length supports taller shelf runs in closets, garages, or utility spaces where more vertical adjustment is useful. The brass look finish provides a brass-style appearance, which helps the standard blend with brass-tone shelving hardware and trim. The standard is made from 17-gauge aluminum, giving an aluminum construction that keeps weight down while still supporting a heavy-duty rating within the KV255 family. At 5/8 inch wide and 3/16 inch deep, the profile stays relatively slim so it sits close to the mounting surface, which is useful when working in tight cabinet or closet interiors. Being part of Knape and Vogt's shelf standards and brackets class ties it directly into a broad, established shelving hardware system.
This Knape and Vogt pilaster standard uses pre-drilled screw or nail holes spaced 6 inches on center, so the fastener pattern repeats the entire 60 inch length for predictable mounting. The ability to use either screws or nails allows you to match the fastener choice to the substrate and your preferred installation method. The 5/8 inch width and 3/16 inch depth allow the standard to sit neatly along cabinet sides or wall studs, which is helpful when you are working inside existing casework. Slots for supports adjustable in 1/2 inch increments run along the standard, so once the piece is anchored you can focus on bracket placement rather than reworking mounting holes.
This 60 inch KV255 heavy-duty aluminum pilaster standard sits in the shelf, closet, and garage organization category, so it fits naturally into storage layouts across those spaces. Its role as a shelf standard and bracket component gives it a defined place in systems where adjustable shelving is needed rather than fixed cleats. The brass look finish adds a brass-like visual to the aluminum body, which works well in closets or built-ins that use brass-tone rods, pulls, or face hardware. With a 5/8 inch by 3/16 inch profile, the standard is suited for mounting along cabinet interiors, side walls, or framed openings without taking away much clear width from the shelf. Available lengths in the KV255 line run from 12 inch up to 96 inch, and this 60 inch piece lands in the middle of that range, making it suitable when you need a full-height run in many closet sections without reaching floor-to-ceiling.
The BHMA Grade 1 compliant design places this standard within a performance-tested category, which matters when projects require predictable behavior under load and over time. Slots for supports adjustable in 1/2 inch increments give tight vertical spacing, letting you move shelves up or down in smaller steps so stored items can be arranged efficiently. Stamped numbers along the face turn that slot grid into a reference scale, helping you match shelf positions on left and right standards without repeated measuring. Pre-drilled screw or nail holes 6 inches on center reduce layout work, because the spacing is already set along the 60 inch length, so you can fasten consistently up a stud or cabinet side. The aluminum construction using 17-gauge aluminum provides a defined material spec, which is helpful when coordinating with other aluminum components in a project. Being offered as part of both broken and full box quantities makes it usable for single-bay builds as well as larger runs where repeated standards are needed.
This KV255 heavy-duty aluminum pilaster standard is 60 inches long, so it supports taller shelving sections where you want multiple adjustable shelf positions along one vertical run.
The pilaster standard measures 5/8 inch wide by 3/16 inch deep, which keeps the profile slim so it fits neatly along cabinet sides or walls without using much interior shelf width.
The standard has slots for supports adjustable in 1/2 inch increments, allowing fine step-by-step shelf height changes to suit different stored items or layout preferences.
This version uses 17-gauge aluminum, providing an aluminum construction that pairs with the brass look finish while aligning with the heavy-duty KV255 shelf standard line.
The pilaster has pre-drilled screw or nail holes spaced 6 inches on center, which creates a consistent fastening pattern along the 60 inch length for even support.
BHMA Grade 1 compliant places the KV255 standard within a recognized performance classification, supporting use in shelving projects where higher performance expectations are specified.
The KV255 heavy-duty aluminum pilaster standard in 60 inch length with brass look finish gives you a defined Knape and Vogt component for adjustable shelving runs. Its 5/8 inch by 3/16 inch profile, 1/2 inch slot increments, BHMA Grade 1 compliance, and pre-drilled 6 inch on-center mounting pattern align well with closet, garage, and utility projects. When planning vertical storage where an established KV255 specification, brass-tone appearance, and repeatable adjustment pattern matter, this 60 inch standard is built to slot directly into that layout.
Sold In: 1 Each
