Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KV255 heavy-duty steel pilaster standard from Knape and Vogt gives a rigid vertical track for building adjustable shelving runs in closets, cabinets, or storage walls. The 72 inch length lets you span tall casework or full-height pantry applications in one continuous member, which helps keep bracket alignment consistent from top to bottom. The brass look finish provides a warm, finished appearance where the standard remains visible, so it works in residential built-ins as well as light commercial millwork. The standard is 5/8 inch wide and 3/16 inch deep, so it sits close to the cabinet side while still offering enough bearing surface for matching brackets. Made from 23-gauge high strength steel in the steel version of the line, it is built for shelf loads that call for a true heavy-duty standard rather than light shelf strip.
The 72 inch steel pilaster standard uses pre-drilled screw or nail holes set 6 inches on center, so fastener locations are already laid out for you along the run, reducing measuring and marking time. Recommended fasteners are KV255-8 nails, sold separately, which match the hole sizing so the standard seats flat when driven off a ladder or from a bench. The 5/8 inch wide body gives enough bearing for fasteners to grip without crowding the cabinet edge, while the 3/16 inch depth lets the standard nest neatly into a routed or surface-mounted position. Slots sized for the KV255 system brackets adjust in 1/2 inch increments, so once the standards are fastened plumb, bracket insertion and shelf leveling become repeatable steps across each bay.
The 72 inch KV255 heavy-duty steel pilaster standard serves tall cabinet interiors, closet walls, or storage cases where multiple shelves must track accurately over a long span. The brass look finish supports jobs where the standard remains visible along face-frame or frameless cabinetry, so the hardware aligns with warm-toned hinges or rods. With dimensions of 5/8 inch wide by 3/16 inch deep, the standard can be surface mounted on cabinet sides without consuming significant usable width, which is useful in pantry or linen cabinets where every inch of shelf depth and width matters. BHMA Grade 1 compliance suits environments that expect repeated shelf adjustments and regular loading, such as utility closets or workroom storage, so installers can rely on a proven standard when specifying hardware lines across a larger project.
The adjustable slot pattern on the KV255 standard is set in 1/2 inch increments, giving installers a fine grid for shelf placement that helps tune clearances for binders, pantry goods, or stacked containers. Stamped numbers at the slots turn that grid into a visual reference, so aligning shelves across a bank of cabinets becomes a quick matter of matching numbers between left and right standards. Pre-drilled screw or nail holes every 6 inches on center anchor the standard at predictable intervals, which helps keep the steel pilaster tight to the substrate and limits flex when shelves are loaded. The 23-gauge high strength steel construction resists deformation under bracket loads, so once the standards are plumbed and fixed, repeated shelf moves do not change the vertical reference. The 72 inch length also minimizes joints between sections, reducing alignment transitions that could telegraph into uneven shelf heights or extra layout steps.
The KV255 heavy-duty steel pilaster standard is a vertical shelf standard from Knape and Vogt, used with matching supports to create adjustable shelving runs that can be reconfigured by moving brackets.
The Knape and Vogt 255 BR 72 standard is 72 inches long, allowing full-height cabinet or closet applications where multiple adjustable shelves must track along a single continuous vertical member.
The KV255 steel standard measures 5/8 inch wide by 3/16 inch deep, so it sits close to the cabinet side while still giving enough profile to guide and support the matching shelf brackets.
The 1/2 inch adjustable slots on the KV255 standard create a fine adjustment grid, so installers can set shelf heights with small changes to clear stored items without large jumps between positions.
Stamped numbers on the KV255 standard identify slot positions, helping installers synchronize left and right standards or multiple bays quickly when leveling shelves across a run.
The 72 inch pilaster standard has pre-drilled screw or nail holes spaced 6 inches on center, providing a regular fastening pattern that speeds layout and keeps the standard tight to the substrate.
The KV255 heavy-duty steel pilaster standard in the 72 inch 255 BR 72 brass look version combines BHMA Grade 1 compliance, 23-gauge high strength steel, and 1/2 inch adjustable slots to support demanding adjustable shelving layouts. Its 5/8 inch wide by 3/16 inch deep profile suits cabinet interiors where space is watched closely, while stamped numbers and 6 inch on-center pre-drilled holes streamline on-site work. For projects that call for a brass tone and repeatable shelf adjustments using the KV255 system, this Knape and Vogt standard provides a consistent backbone for your brackets and shelves.
Sold In: 1 Each
