Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
60 inch KV255 pilaster standard is a heavy-duty steel shelf standard designed for adjustable shelving runs where a long vertical support is needed. The Knape and Vogt 255 ZC 60 model uses 23-gauge high strength steel, which helps the standard resist bending under loaded shelves in typical closet, garage, or shop applications. The 5/8 inch wide by 3/16 inch deep profile keeps the standard slim on the cabinet sidewall while still giving enough bearing surface for the brackets. Slots for supports are adjustable in 1/2 inch increments, so you can set shelf heights in small, repeatable steps without re-drilling cabinet sides. The zinc finish provides a clean, neutral metallic look that works in storage interiors and helps the steel surface stand up to normal indoor environments. This standard is BHMA Grade 1 compliant, which signals a heavy-duty performance level for demanding use.
The 60 inch Knape and Vogt 255 ZC 60 standard is pre-drilled with screw or nail holes spaced 6 inches on center, giving a clear fastening rhythm when laying out fasteners along the cabinet side or wall. This regular spacing helps keep the standard straight while you work from top to bottom. The stamped numbers along the slots create a reference system so opposing standards can be set to the same number for each shelf position, which helps shelves sit level without repeated checking. Slots sized for KV model KV255 supports and spaced in 1/2 inch increments allow shelf brackets to drop in without cutting new notches, so repositioning shelves later is a simple bracket move rather than a new drilling task.
The 60 inch KV255 heavy-duty steel pilaster standard fits tall cabinet interiors, closet sections, and storage runs where a single-piece vertical standard is preferred. The available length range on the KV255 family - from 12, 18, 24, 36, 42, 48, 60, 72, 84, to 96 inches - means this 60 inch version can match mid-height applications while shorter or longer lengths in the same model line cover other cabinet sizes. Because the standard uses 23-gauge high strength steel and a narrow 5/8 inch by 3/16 inch profile, it works in typical cabinet sidewalls without taking excessive space from the shelf area. The zinc finish on this specific 255 ZC 60 model suits utility spaces, garages, and shop cabinets where a practical metallic look is appropriate. The BHMA Grade 1 compliance positions this standard for heavy-duty use in those settings.
The KV255 shelf support system uses slots adjustable in 1/2 inch increments, so an installer can line up bracket positions across multiple cabinets and maintain consistent reveal or clearance under upper elements. Stamped numbers next to the slots help return to the same positions later, which is useful when shelves are removed and reinstalled during service or reconfiguration. Pre-drilled screw or nail holes 6 inches apart on center define a fastening grid, giving repeatable anchor points whether the standard is mounted to studs or to a cabinet side. This regular pattern helps distribute load along the full 60 inch length. Matching the 255 ZC 60 standard with the recommended fasteners KV255-8 nails, sold separately, keeps the fastening method aligned with the standard design. Made in USA manufacturing supports consistent slot spacing, hole placement, and gauge control, which contributes to smoother bracket fit and predictable shelf alignment from one installation to the next.
The KV255 60 inch standard measures 5/8 inch wide by 3/16 inch deep and 60 inches long, so it fits neatly along cabinet sides while giving a full-height bracket run.
The 1/2 inch slot increments on the KV255 standard let you fine-tune shelf height, so you can align shelves with doors, rods, or adjacent cabinets without drilling new holes.
The stamped numbers on the KV255 standard mark bracket positions, helping match the same number on opposing standards so shelves stay level and repeatable across the run.
The Knape and Vogt 255 ZC 60 standard has pre-drilled screw or nail holes spaced 6 inches on center, creating a consistent fastening pattern along the full length.
This KV255 60 inch standard is made from 23-gauge high strength steel with a zinc finish, giving structural rigidity with a practical metallic surface for indoor storage areas.
The KV255 60 inch standard is matched to recommended KV255-8 nails, sold separately, so the fastening approach aligns with the standard design and hole pattern.
The Knape and Vogt 255 ZC 60 heavy-duty steel pilaster standard combines 23-gauge construction, BHMA Grade 1 compliance, and 1/2 inch adjustable slots to support demanding adjustable shelving layouts. The 60 inch length serves tall cabinets and closet sections where a single continuous standard simplifies alignment. Stamped numbers and pre-drilled holes 6 inches on center streamline layout and fastening for installers handling repetitive runs. The zinc finish suits practical storage environments. For projects built around the KV255 shelf support system, this 60 inch model gives a ready match when a mid-height heavy-duty standard is required.
Sold In: 1 Each
