Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KV255 heavy-duty steel pilaster standard describes a Knape and Vogt shelf standard built from 23-gauge high strength steel, which provides a rigid track for shelf supports and helps shelves stay stable under typical cabinet and storage loads. The 96 inch length gives you full-height coverage for tall cabinets or closets, so shelf spacing can be laid out from near the floor up to high storage positions in one continuous run. A narrow 5/8 inch wide by 3/16 inch deep profile fits into tight cabinet walls, which helps when retrofitting existing cases with limited side clearance. The BHMA Grade 1 compliant rating reflects a standard for heavy-duty use, which matters when shelves must support frequent loading in closets, garages, or shop fixtures. The white finish coordinates with white cabinetry and shelving, creating a consistent look in visible interior runs.
The 5/8 inch wide by 3/16 inch deep profile defines how this standard seats against cabinet or closet walls, providing a slim mounting footprint that fits between face frame and back panels in many constructions. Pre-drilled screw or nail holes every 6 inches on center guide fastener placement, creating a repeatable pattern that helps keep the pilaster straight from top to bottom. Slots for supports on 1/2 inch increments establish a consistent vertical grid, so matching standards can be positioned at the same reference point and still deliver level shelves. Stamped numbers next to the slots provide an immediate visual index, which helps match left and right standards to the same shelf height without pulling a tape across the cabinet each time.
The 96 inch KV255 heavy-duty steel pilaster standard suits tall cabinet, closet, and storage runs where a continuous vertical track is preferred. Its 5/8 inch width and 3/16 inch depth allow mounting along cabinet sides, closet partitions, or shop casework where interior space is at a premium, while still providing a defined channel for shelf supports. The BHMA Grade 1 compliant construction from 23-gauge high strength steel supports use in closets, home storage, and similar environments where shelves repeatedly take on and off loads. The white finish lets the standard blend into white case interiors so the focus stays on shelving and stored items instead of vertical hardware. KV255 slots accept supports that match the KV255 model line, tying the standard into a coordinated shelving system from Knape and Vogt.
Slots adjustable in 1/2 inch increments create a clear, repeatable spacing pattern, allowing runs of cabinets or closets to share the same shelf heights without recalculating measurement each time. Stamped numbers along the KV255 heavy-duty steel pilaster standard give an immediate reference point for each slot, which, when matched side to side, keeps shelves level across the span and reduces rework. Pre-drilled screw or nail holes spaced 6 inches on center define fastening points, helping the installer maintain a straight, plumb line as the standard is secured. The 23-gauge high strength steel construction keeps the standard rigid along its 96 inch length, which supports consistent bracket engagement from top to bottom. The combination of standardized slot spacing, numeric indexing, and regular fastener positions helps large projects maintain uniform shelf layouts across multiple openings.
The KV255 heavy-duty steel pilaster standard measures 5/8 inch wide by 3/16 inch deep and 96 inches long, which fits slim cabinet side spaces while covering full-height storage runs.
The KV255 pilaster standard uses 1/2 inch slot increments, allowing small changes in shelf height so different items fit while maintaining a consistent, repeatable spacing pattern.
The KV255 heavy-duty steel pilaster standard is BHMA Grade 1 compliant, indicating it is designed for heavy-duty use where shelves experience frequent loading cycles.
The KV255 pilaster standard has stamped numbers marking slot positions, which lets you match the same number on left and right standards to keep shelves level.
The KV255 heavy-duty steel pilaster standard uses pre-drilled screw or nail holes 6 inches on center, creating a regular fastening pattern that supports a straight, secure install.
This KV255 pilaster standard is made from 23-gauge high strength steel with a white finish, which combines structural rigidity with a clean look in white cabinet interiors.
The 96 inch KV255 heavy-duty steel pilaster standard from Knape and Vogt offers a BHMA Grade 1 compliant track with 1/2 inch adjustable slots, stamped numbers, and pre-drilled 6 inch on-center mounting holes, giving cabinetmakers and installers a structured system for adjustable shelving layouts in white-finished interiors.
Sold In: 1 Each
