Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
96 inch KV255 pilaster standard from Knape and Vogt is a 96 inch long aluminum shelf standard that supports adjustable shelving runs in closets, cabinets, and storage projects. The 255AL 96 model is part of the KV255 family, so it keeps layout and hardware choices consistent across different lengths on the same job. The standard is 5/8 inch wide by 3/16 inch deep, so it fits narrow cabinet spaces while still giving a defined track for shelf supports. Aluminum standards are made from 17 gauge aluminum, which provides a light yet rigid profile that handles repeated shelf repositioning. The natural aluminum finish leaves a clean, neutral look that pairs with a wide range of shelf materials. BHMA Grade 1 compliant construction supports demanding commercial or residential use where consistent performance matters over time.
This aluminum shelf standard is 96 inches long, so it can run nearly full height in tall pantry, closet, or utility cabinets without splicing shorter sections. The 5/8 inch wide by 3/16 inch deep profile allows it to sit neatly along cabinet sides with minimal material removal. Pre-drilled screw or nail holes spaced 6 inches apart on center set a clear fastening pattern, helping installers keep fasteners in line and embedded consistently. Slots for shelf supports adjust in 1/2 inch increments, so installers can align shelves accurately with doors, hardware, or existing construction. Recommended fasteners are KV255-8 nails sold separately, which gives a matched nail option when a nail-driven installation suits the substrate and workflow.
The Knape and Vogt 255AL 96 standard is part of a Shelf, Closet and Garage Organization system, so it integrates naturally into residential, shop, or light commercial storage layouts. As a 96 inch KV255 heavy duty pilaster standard, it is suited to tall runs where full-height adjustment is valuable, such as wardrobe sides or utility closets. The natural aluminum finish works alongside Almond, Brass-look, Brown, White, and Zinc finish options available in the KV255 line, helping designers coordinate standards across open and enclosed storage. Material choices in the family include 23-gauge high strength steel standards and 17-gauge aluminum standards, so this aluminum version can be used selectively where a lighter, corrosion-resistant-feeling profile is preferred. Available lengths in the KV255 range span from 12 to 96 inches, which supports consistent slot spacing and bracket engagement from small cabinets to floor-to-ceiling installations.
BHMA Grade 1 compliant construction means the KV255 family, including the 255AL 96 aluminum standard, is built around performance criteria important in repeat-use environments. Slots that accept supports in 1/2 inch increments allow small adjustments that affect clearances over doors, drawers, and hanging space, so installers can dial in heights without trimming shelves. Stamped numbers on the face of the pilaster standard give an immediate reference point for both left and right cabinet sides, reducing measuring steps and helping keep shelves level across wide spans. The 5/8 inch wide by 3/16 inch deep section lets standards sit flush and predictable, which simplifies layout in face-frame or frameless construction. Pre-drilled screw or nail holes 6 inches on center help distribute holding power along the length, which supports load sharing across multiple fasteners instead of concentrating stress in one area. Within the KV255 system, consistent dimensions and slot geometry across steel and aluminum variations support using the same style of shelf supports from short to tall cabinet bays.
The 255AL 96 aluminum standard is 96 inches long, so it can run nearly full height in tall cabinets or closets without needing multiple shorter sections.
The standard measures 5/8 inch wide by 3/16 inch deep, so it fits into narrow cabinet side spaces while still giving defined support for shelf brackets.
Slots for supports are adjustable in 1/2 inch increments, allowing fine-tuned shelf height changes without altering the cabinet structure.
Pre-drilled screw or nail holes are 6 inches apart on center, which guides consistent fastener spacing along the full length of the standard.
This model is an aluminum standard made from 17 gauge aluminum, giving a light yet strong profile for repeated shelf adjustment.
The 255AL 96 standard has a natural aluminum finish, providing a neutral appearance that coordinates with many shelf and cabinet styles.
This aluminum shelf standard ties directly to the KV255 model family, so its 5/8 inch by 3/16 inch profile, 96 inch length, and 1/2 inch increment slots all match a known system layout. BHMA Grade 1 compliant construction and 17 gauge aluminum material support demanding shelf applications in closets, cabinets, and storage walls. When an installation calls for a natural aluminum KV255 heavy duty pilaster standard with pre-drilled holes spaced 6 inches on center, this 255AL 96 option from Wurth Baer Supply aligns with those requirements.
Sold In: 1 Each
