30 inch KV255 steel pilaster standard defines this Knape and Vogt vertical shelf standard as a 30 inch long, heavy-duty component, which suits projects that need a compact yet robust run of adjustable shelving in cabinets, closets, or work areas. The 5/8 inch wide by 3/16 inch deep profile gives a slim standard that fits tight clearances while still providing a defined track for shelf supports. High strength 23-gauge steel construction creates a rigid upright, which supports demanding storage layouts in woodworking or shop builds. The almond finish gives a neutral, light-toned appearance that blends well with many cabinet interiors, helping installations look consistent. BHMA Grade 1 compliance identifies this standard as meeting a recognized performance level, which matters when specifying hardware for repeat installations or commercial work. Slots for supports adjustable in 1/2 inch increments let you fine-tune shelf height, so you can match clearances to stored items without fixed-step limitations.
The pre-drilled screw or nail holes spaced 6 inches apart on center give a predictable fastening pattern, which streamlines layout when fastening the 30 inch KV255 standard along studs, cabinet walls, or panel substrates. Recommended fasteners listed as KV255-8 nails sold separately identify a nail option designed for this standard, which helps match shank size to the pre-drilled holes for secure mounting. Slots for supports adjustable in 1/2 inch increments define how the shelf brackets engage, which lets you plan vertical spacing in half-inch steps along the full length. The 5/8 inch wide by 3/16 inch deep section gives a compact footprint against the mounting surface, which helps when fitting standards behind face frames or within narrow cabinet sides.
The 30 inch length of the Knape and Vogt Manufacturer Part 255 ALM 30 suits mid-height cabinets or closet sections where a full wall run is unnecessary, which helps avoid cutting longer standards on site. The 5/8 inch wide by 3/16 inch deep dimension fits easily inside typical cabinet side thicknesses, which supports use in kitchen, bath, or utility casework. BHMA Grade 1 compliant performance makes this KV255 heavy-duty steel pilaster standard suitable for demanding shelf loads in closet and garage organization projects. The almond finish allows the standard to visually blend with light-colored shelving or cabinet interiors, which supports a clean, consistent look in finished installations. Membership in the Shelf Standards and Brackets product class identifies its role as the vertical track that works with matching supports in adjustable shelf systems.
Slots for supports adjustable in 1/2 inch increments define a regular pitch along the standard, which helps installers and fabricators keep shelf heights level across multiple standards while still tuning clearance in small steps. Stamped numbers on the face of the KV255 standard give clear reference points during layout, which reduces measuring and helps return to exact positions when shelves are moved. The pre-drilled screw or nail holes 6 inches apart on center keep fastener spacing consistent, which supports straight, repeatable installations across several cabinets on a job. High strength 23-gauge steel provides a rigid channel for shelf supports, which helps shelves track square under load over time. The almond finish on this heavy-duty steel pilaster standard adds a finished appearance that supports professional-looking results without extra covering or trim pieces in typical cabinet or closet interiors.
The KV255 255 ALM 30 standard is 30 inches long, which suits mid-height installations where a full-height wall standard is unnecessary.
The pilaster is 5/8 inch wide by 3/16 inch deep, which allows mounting in tight cabinet spaces while still guiding shelf supports accurately.
Shelf heights adjust using slots for supports in 1/2 inch increments, which lets you set clearances in small, consistent steps along the standard.
Stamped numbers on the KV255 standard act as built-in reference marks, which simplify aligning brackets and matching shelf levels across standards.
The product lists KV255-8 nails sold separately as recommended fasteners, which are sized to work with the pre-drilled screw or nail holes.
BHMA Grade 1 compliance shows the standard meets a recognized performance level, which supports use in projects requiring documented hardware grading.
This heavy-duty steel pilaster standard from Knape and Vogt pairs a 30 inch length with 5/8 inch wide by 3/16 inch deep dimensions, which fits many cabinet and closet layouts without cutting. BHMA Grade 1 compliant construction and 23-gauge high strength steel support demanding shelf loads, which suits professional woodworking projects. Almond finish and stamped numbers combine appearance with layout convenience, which helps finish jobs efficiently. For adjustable shelving that uses 1/2 inch increment slots and pre-drilled 6 inch on-center mounting holes, this 255 ALM 30 KV255 standard offers a focused solution.
Sold In: 1 Each