Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KV255 heavy-duty aluminum pilaster standard gives you a rigid vertical track for adjustable shelving in cabinets, closets, and similar storage runs. This Knape and Vogt standard is the 24 inch length variant, so it suits mid-height cabinets and shorter pantry or utility sections where full-height strips are not required. The model is identified as manufacturer part number 255AL 24, which keeps ordering consistent across projects and service work. The standard belongs to the Shelf Standards and Brackets class, aligning it with common shelf support hardware used in woodworking and interior fit-out. It is described as natural aluminum finish, so it coordinates with other aluminum components and provides a clean, neutral look along the cabinet interior. As part of the KV255 family, it fits into a system of lengths and finishes, allowing layouts that keep hardware style consistent from one opening to the next.
This 24 inch KV255 pilaster standard is designed with pre-drilled screw or nail holes at 6 inch on-center spacing, so fastener placement follows a predictable pattern down the length of the strip. The web description identifies recommended fasteners as KV255-8 nails, sold separately, which ties the standard to a specific fastening option and helps maintain consistency across installations. Slots for supports are adjustable in 1/2 inch increments, so once the standards are fastened, shelf supports can be relocated without moving the strip itself, saving time when adjusting layouts. Stamped numbers run along the standard, which allows installers to match the same number position on each side of a cabinet, keeping shelves level relative to one another. Because the standard is 5/8 inch wide by 3/16 inch deep, it can be surface mounted in many casework situations without requiring significant material removal, supporting straightforward retrofit or new-work mounting.
The 24 inch length of the 255AL 24 pilaster standard makes it well-suited for mid-size cabinet bays, shorter closet sections, and garage or utility shelving where full-height strips are unnecessary. As part of the KV model KV255 line, it shares a consistent slot pattern and geometry with other lengths listed in the same family, such as 12, 18, 36, 42, 48, 60, 72, 84, and 96 inch options. This common pattern allows a layout using longer standards in tall sections and 24 inch standards in shorter cavities while keeping shelf support spacing and adjustment behavior the same throughout a project. The standard is categorized under shelf, closet, and garage organization and shelf brackets and standards, so it fits typical use in organized storage runs in residential, commercial, and shop environments where adjustable shelves are common.
The material is specified as 17-gauge aluminum for aluminum standards, giving a robust section in a lighter alloy compared to 23-gauge high strength steel standards called out in the same product family. In practice, the aluminum construction helps when installing multiple standards overhead or along tall cabinet interiors, since each piece is lighter to position while still providing a strong track for shelf supports. The natural aluminum finish referenced in the description provides a neutral metallic appearance that coordinates with other metal fittings and is appropriate where the standard remains visible inside open shelving or behind glass doors. Because this pilaster standard is BHMA Grade 1 compliant, it aligns with recognized performance criteria that support repetitive use of shelves in demanding applications. The combination of gauge, material, and grade helps maintain performance when shelves are repositioned frequently.
The adjustable slots in 1/2 inch increments allow shelves to be set at fine height intervals, which supports precise positioning for stored items such as binders, containers, or tools. This half inch pattern also means that when multiple case openings share the same KV255 standards, shelf positions line up cleanly from cabinet to cabinet, creating a uniform look across a run of casework. Stamped numbers on the standards further reinforce this repeatability by acting as an index: installers can set all supports at the same number, achieving consistent shelf elevation without repeated measuring. In busy shop workflows or multi-unit projects, this indexing reduces layout time and simplifies field adjustments when end users request different shelf heights.
Pre-drilled screw or nail holes at 6 inch on center directly influence both labor and holding behavior. The regular spacing enables quick marking and fastening along the cabinet side, avoiding guesswork about where to place fixings. Using the recommended KV255-8 nails, sold separately, ties the fastening method to a known companion fastener, maintaining consistent bite into the case material from one installation to another. The 5/8 inch width gives enough bearing surface for fasteners while still allowing the standard to sit comfortably on narrow cabinet gables. At 3/16 inch deep, the profile does not project excessively into the opening, preserving usable shelf width. Because the product is made in USA, it supports projects that specify domestically produced hardware while keeping alignment with the Knape and Vogt KV255 system used widely in woodworking and interior storage layouts.
The 255AL 24 is a KV255 heavy-duty aluminum pilaster standard from Knape and Vogt, used as a vertical track for adjustable shelving within the Shelf Standards and Brackets product class.
The pilaster standard is 24 inches long, which suits mid-height cabinets or shorter storage sections where full-length shelving standards are not required.
The 255AL 24 pilaster is an aluminum standard made from 17-gauge aluminum, providing a robust yet lighter-weight track for adjustable shelf supports in cabinets and storage units.
The KV255 aluminum standard has slots for supports that are adjustable in 1/2 inch increments, allowing fine shelf height changes while keeping opposing standards aligned by using stamped numbers.
The 24 inch pilaster standard has pre-drilled screw or nail holes spaced 6 inches on center, and recommended fasteners are KV255-8 nails, sold separately for consistent installation.
BHMA Grade 1 compliant for this shelf standard indicates it meets a recognized hardware performance level, supporting demanding adjustable shelving applications in storage and cabinetry projects.
The 24 inch KV255 heavy-duty aluminum pilaster standard in natural aluminum offers a defined 5/8 inch by 3/16 inch profile, 1/2 inch adjustment increments, and BHMA Grade 1 compliance, all backed by Knape and Vogt. For cabinet, closet, or garage organization projects that require adjustable shelving on a 24 inch vertical track, this 255AL 24 standard provides a consistent slot pattern and stamped-number indexing across installations. Choosing this length within the KV255 family keeps hardware style, finish, and adjustment behavior aligned from one opening to the next, supporting organized layouts with straightforward adjustment and repeatable results.
Sold In: 1 Each
