Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KV255 heavy-duty steel pilaster standard is a Knape and Vogt 30 inch steel standard in zinc finish that supports adjustable shelving runs in cabinet, closet, and storage layouts. The standard is 5/8 inch wide and 3/16 inch deep, so it fits narrow stile spaces while still providing a defined bearing surface for KV supports. The steel standard is produced from 23-gauge high strength steel, which resists flex in normal shelving applications and supports repeatable bracket engagement over time. The zinc finish on this pilaster standard provides a clean metallic look that coordinates with other zinc shelf hardware. This KV255 pilaster standard is BHMA Grade 1 compliant, giving a tested performance level that suits demanding storage or shop environments. Knape and Vogt identifies this part as 255 ZC 30, so matching to existing layouts using the same model designation stays straightforward.
This Knape and Vogt KV255 pilaster standard uses slots for supports that are set in 1/2 inch increments, giving a predictable pattern to reference during layout and drilling. Pre-drilled screw or nail holes are spaced 6 inches apart on center along the standard, so fastening points are already located for attaching to cabinet sides or wall framing. The pre-drilled pattern supports consistent installation from one opening to the next, which helps when building multiple cabinets to the same plan. Recommended fasteners are KV255-8 nails sold separately, and that reference simplifies specifying matching fasteners on a hardware list. The 23-gauge high strength steel construction gives the standard a solid base for fasteners and support engagement, which is important when the standard is anchored over taller 30 inch runs.
This 30 inch KV255 heavy-duty steel pilaster standard fits shelf, closet, and garage organization layouts that are built around Knape and Vogt shelf standards and brackets. The 5/8 inch wide profile works in cabinet interiors where side material or face frame width is limited but adjustable shelves are still needed. Because slots are adjustable in 1/2 inch increments, this standard serves well in storage runs where contents height may change, such as utility cabinets, shop shelving, or closet sections. The zinc finish ties in with other zinc-coated shelf components, so exposed standards still present a consistent appearance with brackets and related hardware in the same finish family. BHMA Grade 1 compliance suits institutional, commercial, or higher-use residential projects that call for a documented performance level. The Made in USA origin of this KV255 standard aligns with projects that specify domestic manufacturing for hardware components.
The stamped numbers on the KV255 steel standard give installers a built-in reference scale, which helps them set matching shelf elevations across multiple standards without separate measuring marks. When left and right standards share the same stamped number at a given bracket position, shelves seat level more consistently from cabinet to cabinet. Pre-drilled screw or nail holes spaced 6 inches on center simplify marking and drilling through the cabinet side, which speeds layout while maintaining consistent fastener spacing across a bank of cabinets. The 23-gauge high strength steel provides a stable track for brackets as loads are added or shelf positions are changed, supporting long-term use without the standard deforming under typical service. The 3/16 inch depth allows the standard to recess into a shallow groove or sit flush on the surface while keeping the slot geometry exposed for supports. Knape and Vogt part number 255 ZC 30 clearly identifies the zinc finish and 30 inch length, so replacement or expansion pieces can match existing installations using the same specification naming.
The KV255 255 ZC 30 standard is 30 inches long, which suits medium-height cabinet or closet openings where multiple adjustable shelf positions are required.
This KV255 steel pilaster standard is 5/8 inch wide and 3/16 inch deep, letting it fit narrow cabinet stiles or dados while still supporting shelf brackets.
The KV255 pilaster standard uses 23-gauge high strength steel, giving a rigid track for shelf supports and providing solid purchase for screw or nail fasteners.
Slots for supports are arranged in 1/2 inch increments, so shelf positions can be changed in small, regular steps to suit different storage heights.
The KV255 standard has pre-drilled screw or nail holes spaced 6 inches apart on center, helping maintain uniform fastening along the cabinet or wall surface.
BHMA Grade 1 compliance indicates this KV255 shelf standard has been tested to a high performance level, supporting use in demanding storage or institutional settings.
This Knape and Vogt 30 inch KV255 heavy-duty steel pilaster standard in zinc finish combines BHMA Grade 1 compliance, 23-gauge high strength steel, and 1/2 inch slot increments to support adjustable shelving layouts. With 5/8 inch width, 3/16 inch depth, and pre-drilled 6 inch on-center fastening holes, it integrates into cabinet, closet, or storage builds that favor predictable, repeatable shelf positioning. For projects matching existing 255 ZC 30 installations or planning new adjustable runs around the KV255 system, this standard provides the defined dimensions and performance attributes needed for consistent results.
Sold In: 1 Each
