Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
24 inch KV255 aluminum pilaster standard gives you a heavy-duty vertical shelf standard in a compact length, so you can support adjustable shelves in cabinets or closet runs where a shorter standard is needed. The Knape and Vogt KV255 model uses a brass-look finish, which provides the appearance of brass while keeping the structure based on aluminum, useful where visible hardware needs a warmer tone. The standard is 5/8 inch wide, giving a narrow profile that fits tight cabinet sides yet still provides reliable engagement for matching supports. At 3/16 inch deep, the profile sits low in the cabinet side, which helps when routing shallow dados or fitting between face frames and interiors. Aluminum standards in this series use 17-gauge aluminum, giving a sturdy track for shelf supports while keeping weight down during handling and layout.
The KV255 aluminum standard uses pre-drilled holes 6 inches on center, which sets a consistent fastening pattern from top to bottom so every standard in a bank can be mounted with the same layout. The 5/8 inch width lets the standard sit neatly on cabinet sides, which helps when aligning the front edge to a face frame or door reveal while still leaving enough material for fasteners. With a depth of 3/16 inch, the standard can be surface-mounted or set into a shallow groove, which gives flexibility depending on whether a flush or proud installation is preferred for the project. Slots on the KV255 accept supports at 1/2 inch increments, so once the standards are fixed, shelf clips can be shifted up or down in small steps without moving the pilaster.
The 24 inch length suits cabinet interiors, shorter closet sections, or shelving units where full-height standards are unnecessary, keeping the hardware confined to the working shelf area. As part of the KV255 line, this standard belongs to a family of lengths ranging from 12 inches through 96 inches, which helps when coordinating different cabinet heights in the same job while using a consistent slot pattern. At 5/8 inch wide, it sits comfortably along cabinet sides, making it a solid choice for kitchen, bath, or utility cabinets that need multiple adjustable shelves without sacrificing side clearance. The 3/16 inch depth keeps the profile slim, so it works well in built-ins where the standard must sit close to the surface without interfering with door operation or interior components. The brass-look finish can blend with warm-toned hinges, pulls, or rods, which is useful in closet or furniture applications where hardware appearance matters.
Slots that accept supports at 1/2 inch increments give installers fine control over shelf height, which lets them match critical dimensions for equipment, files, or storage bins and repeat those heights across multiple cabinets. Stamped numbers along the KV255 track provide visual reference points, so left and right standards can be set to the same shelf position quickly, reducing the chance of uneven or rocking shelves. The BHMA Grade 1 compliant rating signals that the standard meets a defined performance benchmark, supporting its role in installations where shelves will be adjusted and loaded many times over the life of the cabinet. Pre-drilled screw or nail holes at 6 inch centers simplify fastening, because each standard in a run can be mounted using the same measurements, which speeds layout when working through banks of cabinets or closets. The 17-gauge aluminum construction offers a strong yet manageable component, making handling, cutting to fit if required on site, and fastening straightforward during installation workflows.
The 255AL BR 24 pilaster standard is 24 inches long, which suits cabinet interiors or shorter closet sections where full-height standards are unnecessary.
The KV255 aluminum standard is 5/8 inch wide and 3/16 inch deep, so it fits narrow cabinet sides while keeping a low profile against the interior surface.
The KV255 pilaster has slots for supports in 1/2 inch increments, allowing shelf clips to move up or down in small steps to match storage needs.
This pilaster has pre-drilled screw or nail holes 6 inches on center, giving a consistent fastening pattern top to bottom for straightforward installation.
The 24 inch KV255 standard uses 17-gauge aluminum with a brass-look finish, providing a sturdy track with a warm metallic appearance.
BHMA Grade 1 compliant means this shelf standard meets a recognized performance level, supporting demanding adjustable shelving applications.
The 24 inch KV255 heavy-duty aluminum pilaster standard in brass-look finish combines 17-gauge aluminum construction, BHMA Grade 1 compliance, and 1/2 inch shelf adjustment, giving cabinet and closet projects a consistent, repeatable way to support adjustable shelving with a warm-toned visible track.
Sold In: 1 Each
