Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KV255 heavy-duty steel pilaster standard describes a Knape and Vogt shelf standard designed to support adjustable shelving runs in cabinets, closets, and similar projects. The 48 inch length gives installers a mid-range vertical standard that works well in common cabinet and closet heights where full floor-to-ceiling runs are not required. The 5/8 inch wide by 3/16 inch deep profile keeps the standard slim in the casework while still providing a defined track for the matching supports. Steel construction in 23-gauge high strength steel provides a rigid backbone for the shelf supports, which supports repeatable performance under normal storage loads when used with appropriate brackets. The brown finish blends with darker interiors and wood tones, which helps the standard sit visually in the background while the shelves remain the focus. BHMA Grade 1 compliance indicates the standard has been tested to a recognized performance benchmark for shelf standards, which matters on jobs where predictable, documented hardware performance is important.
Pre-drilled screw and nail holes at 6 inch spacing on center run the length of the KV255 pilaster, which gives installers a regular fastening pattern that ties the standard back to the cabinet or wall structure without guesswork on hole placement. The slots for supports are adjustable in 1/2 inch increments, which lets shelving heights be fine-tuned in small steps so users can accommodate books, storage bins, or kitchen items without being locked into coarse spacing. The 5/8 inch wide face provides enough surface area to sit flat against the mounting surface, which helps the fasteners clamp the standard securely and reduces movement when shelving is reconfigured. Recommended fasteners are KV255-8 nails, sold separately, which are specified to work with the pre-drilled holes so the field installation can follow a known pairing of standard and fastener type.
The 48 inch KV255 heavy-duty steel pilaster standard is well-suited to cabinet interiors, mid-height closets, and storage runs where four feet of vertical adjustment covers the planned shelving. The 5/8 inch wide by 3/16 inch deep shape keeps the standard low profile inside kitchen, bath, or office cabinets, so it can be recessed into case sides without consuming valuable interior width. Available lengths for the same model range from 12 inches up to 96 inches, which allows a shop or installer to design an entire project line around one standard family and scale the length to each opening while maintaining the same slot pattern.
The BHMA Grade 1 compliant rating gives the KV255 series a defined performance level, which can be important on commercial millwork, institutional, or multi-unit residential jobs that call out graded hardware. Slots on 1/2 inch centers provide dense adjustment points, which helps with fine tuning shelf positions so clearances align with surrounding doors, drawers, or architectural reveals. Stamped numbers next to the slots offer a quick visual reference during installation and later adjustments, which helps crews consistently place matching brackets at the same height in multiple cabinets without measuring each pair. The pre-drilled screw and nail holes at 6 inch on-center intervals give a clear fastening roadmap down the length of the pilaster, which supports uniform load transfer into the substrate and speeds repetitive installation work across a run of cabinets or closets.
The KV255 48 inch pilaster is a Knape and Vogt heavy-duty steel shelf standard, so it serves as the vertical track that carries adjustable shelf supports along a cabinet or closet wall.
The KV255 steel standard is 5/8 inch wide and 3/16 inch deep, so it stays slim in the cabinet side while still providing enough bearing surface for secure fastening and support engagement.
The 48 inch pilaster has pre-drilled screw or nail holes 6 inches apart on center, giving a regular fastening pattern that ties the standard back to the cabinet or wall along its full length.
The shelf support slots are adjustable in 1/2 inch increments, allowing fine adjustment of shelf height so clearances for stored items and door reveals can be tuned closely.
This pilaster uses 23-gauge high strength steel, giving a rigid track for shelf brackets that is suitable for repeated adjustments and normal storage loads in cabinetry and closet work.
The KV255 standard lists KV255-8 nails, sold separately, as recommended fasteners, providing a specified match between nail size and the pre-drilled hole pattern along the pilaster.
The 48 inch KV255 heavy-duty steel pilaster standard in brown finish combines a BHMA Grade 1 compliant design, 23-gauge high strength steel, and 1/2 inch slot adjustments, which supports dependable, repeatable shelf layouts. The 5/8 inch wide by 3/16 inch deep profile, stamped slot numbers, and pre-drilled 6 inch on-center fastener pattern all work together to streamline field installation and later adjustments across cabinets and closets. Select this Knape and Vogt 255 BRN 48 standard when a mid-length, brown steel shelf standard aligns with your project dimensions and hardware specification.
Sold In: 1 Each
