Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KV255 heavy duty pilaster standard from Knape and Vogt is an 84 inch steel shelf standard that supports adjustable shelving runs in cabinets, closets, or storage walls where you need repeatable support locations. The 5/8 inch wide by 3/16 inch deep profile keeps the pilaster slim in the cabinet side, which matters when you are working with tight reveals or narrow gables. Steel standards use 23 gauge high strength steel, so the upright resists flexing when shelf supports are loaded. White finish coordinates with white interiors, helping the standard visually blend into casework. BHMA Grade 1 compliant performance gives a tested standard for commercial and high-use residential projects where hardware selection follows recognized grades.
This 84 inch KV255 heavy duty pilaster standard installs using pre-drilled screw or nail holes spaced 6 inches apart on center, which supports consistent fastening patterns along tall cabinet sides. The 5/8 inch wide by 3/16 inch deep section fits into narrow face-frame or frameless cabinet members, so installers can align the running slots close to the front edge without removing excessive material. Stamped numbers on the standard guide layout for left and right pairs, helping keep shelf supports level across a run of cabinets. Slots on 1/2 inch centers give flexibility to reposition shelves without moving the standard, which is valuable on projects that may change storage layouts over time.
The 255 WH 84 pilaster is an 84 inch KV255 heavy duty pilaster standard sized for tall installations such as pantry cabinets, closet runs, or utility storage where continuous vertical adjustment is useful. The 5/8 inch wide profile lets the standard sit close to the cabinet side edge, so shelves can be supported near the front for better access. White finish matches common white melamine or painted interiors, which helps the hardware recede visually in residential or light commercial casework. Steel standards using 23 gauge high strength steel give structure to tall vertical runs, helping maintain alignment when multiple brackets and loaded shelves are engaged over the full height.
Slots for supports adjustable in 1/2 inch increments give finer control of shelf placement, which matters when aligning with doors, countertop heights, or specific storage items. Stamped numbers on the standard provide a repeatable reference, making it straightforward to return to a previous shelf position or match a height across several cabinets. Pre-drilled screw or nail holes at 6 inches on center reduce layout time because the fastening pattern is already engineered for the length of the standard. BHMA Grade 1 compliant performance indicates a tested level of durability, supporting use in higher traffic areas where shelves may be reconfigured repeatedly. Recommended fasteners KV255-8 nails, sold separately, align with the pre-drilled pattern so fastening matches the standard design.
The KV255 heavy duty pilaster standard in this version is 5/8 inch wide by 3/16 inch deep and 84 inches long, which fits slimly into cabinet sides while covering tall storage sections.
The slots for supports are adjustable in 1/2 inch increments, allowing fine tuning of shelf heights to clear contents or align with hardware without reworking the installation.
Stamped numbers make installation easier by giving clear height references, so matching positions on left and right standards is quicker and results in level shelves.
The 255 WH 84 pilaster uses recommended fasteners KV255-8 nails, sold separately, which are specified to work with the pre-drilled screw or nail hole pattern.
Pre-drilled holes 6 inches apart on center provide an even fastening layout, saving layout time and helping keep the standard straight over the 84 inch length.
BHMA Grade 1 compliant means the shelf standard meets a recognized performance level, supporting use where tested durability and consistent hardware performance are important.
The 84 inch KV255 heavy duty pilaster standard from Knape and Vogt combines 23 gauge high strength steel, BHMA Grade 1 compliant performance, and 1/2 inch adjustable slots to support adjustable shelving in tall cabinets or closets. The 5/8 inch wide by 3/16 inch deep profile, pre-drilled holes 6 inches on center, and stamped numbers all work together to streamline layout and alignment. For projects needing white interior hardware with fine shelf adjustment across full-height storage, this 255 WH 84 pilaster provides a practical, repeatable standard.
Sold In: 1 Each
