Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
96 inch KV255 pilaster standard gives you a full-height Knape and Vogt steel upright for building adjustable shelving runs in tall cabinets, closets, or storage walls where continuous support is needed from top to bottom. The 5/8 inch wide by 3/16 inch deep profile creates a slim standard that fits into narrow cabinet sides while still providing a defined track for shelf supports. Brown finish matches brown-trim projects and keeps the standard visually subdued when mounted inside casework. The 23-gauge high strength steel construction provides a rigid track for shelf clips so loaded shelves stay aligned along the pilaster. BHMA Grade 1 compliance means the standard is built to a recognized performance level for heavy-duty shelf systems in demanding environments. KV model KV255 and part number 255 BRN 96 give installers a repeatable reference when matching or extending existing KV255 layouts.
The KV255 brown steel standard uses pre-drilled screw or nail holes spaced 6 inches on center, so installers can fasten through consistent points along studs or cabinet gables without separate layout marks at every fastener. Slots for supports are arranged in 1/2 inch increments, creating a regular grid that lets brackets lock into repeating positions along the full 96 inch length. The 5/8 inch width and 3/16 inch depth are sized for typical cabinet side material, which helps the standard sit flush or near-flush so shelves and contents clear the pilaster. Stamped numbers next to the slots act as a built-in measuring guide, which is useful when aligning opposing standards or recording shelf positions for later adjustments in the field.
This Knape and Vogt KV255 steel standard in 96 inch length is designed for tall cabinet, closet, or storage runs where continuous vertical adjustment is needed from floor to near-ceiling. The long single-piece pilaster lets shelves tie into one uninterrupted track along the cabinet side, which keeps shelf support points aligned even as spans get taller. With a 5/8 inch wide by 3/16 inch deep profile, the standard fits into many cabinet side constructions without consuming excessive interior space, so shelf width remains usable while still gaining a defined support channel. The brown finish matches brown interiors or trim, which helps the uprights visually recede when installed in darker casework such as closets or built-ins with stained components. BHMA Grade 1 compliance identifies the standard as suitable for heavy-duty shelf applications, so it can be specified where shelf loading and frequent adjustment are routine requirements.
Slots for supports set at 1/2 inch increments allow close control over shelf elevation, so installers can fine-tune heights for hardware clearances, appliance footprints, or user ergonomics without cutting new fixed cleats. Stamped numbers beside the slots give a direct visual reference when setting brackets, which helps match left and right standards at the same level and speeds repeat setups across multiple cabinets. Pre-drilled screw or nail holes every 6 inches on center create a predictable fastening pattern, allowing fasteners to land at regular intervals and helping the standard track straight along studs or cabinet gables during installation. The 23-gauge high strength steel material forms a stiff channel for shelf clips, which supports consistent bracket engagement and helps keep shelves seated during loading, unloading, or repositioning. KV model KV255 and manufacturer part 255 BRN 96 provide clear identification on drawings or orders, supporting accurate replacement or expansion of existing KV255-based shelving layouts.
The 255 BRN 96 pilaster standard measures 96 inches long, 5/8 inch wide, and 3/16 inch deep, which fits typical cabinet sides while providing a tall continuous track for shelf supports.
The KV255 slots are spaced in 1/2 inch increments, giving fine control of shelf height so installers can align shelves to clear doors, rods, or equipment without re-drilling fixed supports.
The BHMA Grade 1 compliant rating on the KV255 standard indicates it is built for heavy-duty shelf applications, supporting use in demanding commercial or high-use residential installations.
Stamped numbers on the KV255 standard provide a visual index for the slots, which helps installers match bracket levels left to right and record specific shelf positions for later changes.
Pre-drilled mounting holes 6 inches on center let installers fasten the standard at regular intervals, helping it track straight along cabinet gables or wall framing over the full 96 inches.
This KV255 pilaster uses 23-gauge high strength steel with a brown finish, providing a rigid support track that visually coordinates with darker cabinet interiors or trim work.
The 96 inch KV255 heavy-duty steel pilaster standard in brown finish gives installers a tall, BHMA Grade 1 compliant track for adjustable shelving using Knape and Vogt hardware. With slots in 1/2 inch increments, stamped numbers, and mounting holes 6 inches on center, this 5/8 inch wide by 3/16 inch deep standard supports accurate layout and repeatable adjustments in cabinet, closet, or storage projects where a defined, full-height shelf standard is required.
Sold In: 1 Each
