Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KV255 heavy-duty steel pilaster standard describes a Knape and Vogt 72 inch vertical shelf standard that supports adjustable shelving runs in cabinets, closets, and storage builds. The 72 inch length spans tall casework, so one piece handles full-height installations without stacking shorter standards. The 5/8 inch wide by 3/16 inch deep profile keeps the standard low-profile in side panels, so it works well where space is tight along cabinet walls. Steel standards made from 23-gauge high strength steel provide a strong support track for shelf brackets, which matters when shelves carry tools, supplies, or dense stock. The white finish matches common melamine interiors and painted cabinetry, helping the standard visually blend into light-colored casework. BHMA Grade 1 compliance indicates the standard is built to a recognized performance level, which supports use in demanding commercial or high-use residential environments.
The 72 inch KV255 standard uses pre-drilled screw or nail holes set 6 inches apart on center, so fastener placement can follow a consistent pattern during installation. That regular spacing helps align fasteners to framing or panel lines, which reduces layout steps when repeating the installation across multiple bays. Slots for supports adjustable in 1/2 inch increments give the installer a clear grid to follow when setting shelf locations, so moving a shelf simply means jumping to the next slot without new measurements. Recommended fasteners listed as KV255-8 nails (sold separately) point to a matched nail option, and using a recommended fastener style supports proper engagement in typical cabinet or closet substrates.
The 72 inch KV255 heavy-duty steel pilaster standard fits tall storage runs where continuous vertical adjustment is important, such as full-height closets, pantry cabinets, and utility storage. The white finish coordinates with white melamine, painted shop cabinets, and many closet systems, so it supports clean-looking interiors without drawing attention. Available lengths in the same model line - 12, 18, 24, 36, 42, 48, 60, 72, 84, and 96 inches - give designers and installers a single family of standards for mixed-height runs, which keeps bracket interface and adjustment consistent across a project. Material options in the broader line, with steel standards made from 23-gauge high strength steel and aluminum standards made from 17-gauge aluminum, mean the KV255 system can address different weight and environment requirements while holding the same general layout logic.
BHMA Grade 1 compliant construction on the KV255 heavy-duty steel pilaster standard means the standard follows an established performance level, which supports repeatable results when building out multiple rooms or facilities using the same hardware family. The slot pattern that adjusts shelf supports in 1/2 inch increments creates a tight vertical grid, so dialing in clearances for doors, drawer faces, or tall items becomes a simple step-count rather than custom marking each position. Stamped numbers along the standard add a visual reference, so installers and shop staff can call out matching positions by number and keep shelves at the same height from bay to bay. Pre-drilled holes located 6 inches apart on center keep fastening points evenly spaced, which helps distribute load along the cabinet side or wall and supports stable shelving when loads change over time.
The 255 WH 72 standard is 72 inches long and measures 5/8 inch wide by 3/16 inch deep, which keeps it slim in cabinet sides while offering a clear track for shelf supports.
The KV255 slots adjust in 1/2 inch increments, allowing small height changes so shelf positions can be tuned to the stored items without redesigning the cabinet layout.
This KV255 standard uses 23-gauge high strength steel, giving a robust track for brackets that supports demanding storage applications in shop, closet, or utility installations.
Stamped numbers provide a quick visual reference, so matching shelf heights across opposing standards becomes a simple matter of using the same number on each side.
Pre-drilled screw or nail holes are spaced 6 inches on center, creating a regular fastening pattern that supports even load distribution along the mounting surface.
BHMA Grade 1 compliant means the KV255 standard meets a defined performance grade, which supports use in projects where consistent strength and durability are required.
The 72 inch KV255 heavy-duty steel pilaster standard in white finish gives installers a tall, BHMA Grade 1 compliant shelf track with 1/2 inch adjustment steps and regular 6 inch on-center fastener holes. Those details help streamline layout, fastening, and shelf alignment in cabinet, closet, and storage projects. For projects needing coordinated lengths and finishes within the same Knape and Vogt KV255 family, this 255 WH 72 standard provides a straightforward option for tall runs where consistent adjustment and appearance are important.
Sold In: 1 Each
