Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KV255 steel pilaster standard describes the Knape and Vogt 255 WH 30, a 30 inch heavy-duty pilaster standard in white finish designed for adjustable shelving layouts. The standard measures 5/8 inch wide by 3/16 inch deep, so it fits narrow cabinet and closet face frames where space is tight but reliable support is needed. The steel standards use 23-gauge high strength steel, providing a sturdy track for shelf supports in woodworking and storage builds. Slots for supports are adjustable in 1/2 inch increments, which lets you fine-tune shelf heights without re-drilling structure. Stamped numbers on the standard make installation easier by giving consistent reference points when aligning multiple standards in a run. Pre-drilled screw or nail holes spaced 6 inches apart on center streamline fastening and layout along panels or uprights. The BHMA Grade 1 compliant rating indicates a heavy-duty standard intended for demanding shelf applications.
The Knape and Vogt KV255 pilaster standard uses pre-drilled holes spaced 6 inches on center for screws or nails, so installers can fasten the standard in a regular pattern without marking each point. Recommended fasteners are KV255-8 nails sold separately, which gives a known match between standard and nail size when attaching to wood. The 5/8 inch wide by 3/16 inch deep profile sits flat against cabinet or closet sides, helping the standard pull tight when fasteners are driven. Stamped numbers along the length act as built-in layout marks, simplifying tasks such as matching shelf elevations on opposing sides of a cabinet. BHMA Grade 1 compliant construction supports heavy-duty shelf installations where long-term performance is important.
This 30 inch KV255 steel pilaster standard in white finish fits well into mid-height cabinet, closet, or storage bays that benefit from adjustable shelving. The 5/8 inch width and 3/16 inch depth allow installation along interior sides without taking much usable space, which helps maintain shelf depth in narrow carcasses. Because slots accept shelf supports at 1/2 inch increments, the standard is suited to applications where contents may change often, such as utility cabinets, closet systems, or shop storage. BHMA Grade 1 compliance points to heavy-duty use, so this standard is appropriate for demanding shelving where frequent repositioning and substantial loads are part of normal service. The white finish coordinates with white closet components or painted cabinetry, supporting a clean-looking interior in residential or commercial projects.
The stamped numbers along the KV255 pilaster standard provide a consistent reference when setting bracket heights, which helps achieve level shelves across multiple standards with minimal rework. Pre-drilled screw or nail holes every 6 inches on center establish a regular fastening pattern, helping keep the standard straight while distributing load along the mounting surface. Using 23-gauge high strength steel in the standard gives the slots a firm bearing surface for shelf supports, which supports long-term engagement under repeated adjustments. The 1/2 inch slot adjustment spacing works well for tuning ergonomics, allowing installers to shift a shelf slightly to clear equipment or align with adjacent components. As a 30 inch member in the KV255 family, this standard fits installations where a defined vertical range is needed without trimming longer pieces, saving fabrication steps on site.
The KV Model KV255 255 WH 30 standard measures 5/8 inch wide by 3/16 inch deep and 30 inches long, which suits medium-height cabinet or closet interiors needing adjustable shelving.
The slots adjustable in 1/2 inch increments let you move shelf supports in small steps, so shelf heights can be tuned closely to stored items or to align with nearby components.
The steel standards use 23-gauge high strength steel, giving the slots a robust track for shelf supports in woodworking or storage applications that see frequent adjustments.
Stamped numbers on the KV255 standard act as built-in reference marks, helping match bracket positions between standards for level shelves with minimal measuring.
The pilaster standard has pre-drilled screw or nail holes spaced 6 inches apart on center, which organizes attachment points for a straight, consistently supported installation.
The recommended fasteners are KV255-8 nails sold separately, giving an option matched to the standard for fastening into suitable substrates.
The Knape and Vogt 255 WH 30 KV255 steel pilaster standard combines a 30 inch length, 5/8 inch by 3/16 inch profile, and BHMA Grade 1 compliant high strength steel for heavy-duty adjustable shelving runs. The white finish, 1/2 inch slot increments, stamped numbers, and 6 inch on-center pre-drilled holes support clean layout and efficient installation in cabinets, closets, or storage builds. For projects needing a medium-length, white adjustable shelf standard with proven performance details, this KV255 option offers a well-defined, job-ready choice.
Sold In: 1 Each
