Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KV255 heavy-duty steel pilaster gives cabinet and closet projects a 5/8 inch wide by 3/16 inch deep vertical standard that manages adjustable shelving in a tight footprint. The 24 inch length works well in base cabinets or shorter uprights, so runs stay strong without overwhelming smaller casework. Steel standards in this model use 23-gauge high strength steel, which supports demanding storage applications while keeping the profile slim for precise layout work. Slots for supports are adjustable in 1/2 inch increments, letting installers fine-tune shelf heights using consistent, repeatable spacing across a bank of cabinets. Stamped numbers run along the standard, so aligning opposing rows is faster and more accurate during layout and installation. The BHMA Grade 1 compliant rating signals this standard is designed for heavy-duty service, which matters when shelves must carry regular use in shop, office, or residential storage.
This 24 inch Knape and Vogt 255 WH 24 standard uses pre-drilled screw or nail holes spaced 6 inches on center, so installers can fasten into carcass sides without separate marking for each point. Recommended fasteners are KV255-8 nails sold separately, which tie the standard to the substrate using hardware matched to the slot pattern and hole size. Steel standards from this series use 23-gauge high strength steel, giving a rigid mounting surface that stays straight once secured to cabinet or closet sides. The 5/8 inch width and 3/16 inch depth keep the steel close to the surface, so fasteners pull the standard tight for a solid fit along plywood, particleboard, or similar construction materials.
The 24 inch KV255 heavy-duty steel pilaster standard fits projects where a short, controlled run of adjustable shelving is needed, such as base cabinets, vanities, or lower closet sections. Its 5/8 inch wide by 3/16 inch deep size lets it sit along interior cabinet walls without stealing space from shelves, which is useful when interior depth is limited. BHMA Grade 1 compliant construction supports heavy-duty use, so it suits applications that see frequent shelf repositioning or higher loads in shop storage, office fixtures, or utility cabinets. The white finish blends with painted or white laminate interiors, so hardware stays visually quiet while remaining easy to see when aligning shelf clips and reading the stamped numbers.
Slots adjustable in 1/2 inch increments give a predictable grid for shelf heights, which helps installers transfer layout dimensions directly from drawings to the cabinet interior. Stamped numbers down the length of the standard allow left and right sides to be matched by number, so shelves sit level without repeated measuring between supports. Pre-drilled screw or nail holes 6 inches apart on center keep every standard in a run fastened at the same intervals, which helps maintain straight lines and reduces twist or bow once loaded. Steel standards made from 23-gauge high strength steel resist flexing under typical shelf loads, so brackets stay seated in the slots and keep shelves tracking square over time. The Knape and Vogt 255 WH 24 model and KV255 heavy-duty steel pilaster designation tie this piece to a recognized shelving system, which helps maintain consistency when repeating details across multiple rooms or projects.
The pilaster standard is 24 inches long and has a 5/8 inch wide by 3/16 inch deep profile, which helps it fit inside cabinet or closet sides without taking excessive interior space.
The slots are adjustable in 1/2 inch increments, giving a regular grid so shelf heights can be shifted up or down in consistent steps while keeping elevations matched across multiple standards.
BHMA Grade 1 compliant construction indicates the standard is built for heavy-duty service, which supports demanding storage uses where shelves are loaded regularly or re-positioned often.
This model uses 23-gauge high strength steel, giving a rigid track for shelf supports while maintaining a slim profile suitable for cabinet and closet interiors.
The standard has pre-drilled screw or nail holes spaced 6 inches apart on center, which organizes fastening points and keeps each run of standards secured at consistent intervals.
Recommended fasteners are KV255-8 nails sold separately, so installers can use hardware that matches the hole size and is specified for this pilaster series.
The Knape and Vogt 24 inch KV255 heavy-duty steel pilaster standard in white pairs BHMA Grade 1 compliant strength with 1/2 inch slot adjustments and stamped numbers, giving installers a predictable system for adjustable shelving. Its 5/8 inch wide by 3/16 inch deep, 23-gauge high strength steel profile fits cabinet and closet interiors while keeping shelf support alignment clear and repeatable. For projects that call for reliable vertical standards across multiple units or rooms, this 255 WH 24 model from Wurth Baer Supply delivers a consistent layout approach from one installation to the next.
Sold In: 1 Each
