Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 255 WH 18 heavy duty pilaster standards provide a steel track for adjustable shelving in cabinets, closets, and storage runs where repeatable support positions are needed. The KV Model KV255 format identifies this as part of Knape and Vogt's shelf standards system, so it ties directly into applications that rely on slotted pilasters. The 18 inch length suits shorter cabinet interiors or sections in a larger run, giving installers a defined support zone without excess trimming. A 5/8 inch wide by 3/16 inch deep profile keeps the standard low-profile against the sidewall, which helps preserve usable interior space while still guiding the supports. White steel matches common light interior finishes, so the standard recedes visually in painted cabinet boxes and many closet systems. Steel construction sets a solid base for shelf supports, which matters when shelves carry regular household or shop loads.
These heavy duty pilaster standards are designed for surface or flush mount applications, so they can sit directly on the cabinet side or be recessed into a routed groove depending on the job. That mounting flexibility lets a shop match the look and build method of different cabinet lines without changing hardware families. The 5/8 inch wide by 3/16 inch deep section works within common cabinet side thicknesses, giving room for either approach in plywood or composite materials. Pre-drilled holes at 6 inches on center simplify fastening through to the cabinet side, saving layout time and helping maintain straight, plumb runs. When used surface mounted in garage or closet systems, the white finish coordinates with typical painted side panels, keeping the installation visually consistent while still clearly marking slot positions.
This 18 inch white steel pilaster suits cabinet interiors and storage sections where shelf heights need to change over time without rebuilding. The modest length works well in base cabinets, wall cabinets, or shorter closet partitions where full-height standards are unnecessary. Because the KV255 series is available in lengths from 12 inches up to 96 inches, a shop can keep the same slot profile and layout logic across different cabinet heights, simplifying layout and cutting down on mixed hardware setups. The 5/8 inch width allows the standard to sit neatly along cabinet sides, leaving room for face frames or doors while still giving full slot access. In garage, closet, or shop organization runs, the 18 inch piece can fill gaps or support shorter shelf sections, aligning with longer standards where needed.
The BHMA Grade 1 compliant rating on this KV255 standard gives a defined performance reference, which helps specifiers match shelf hardware to projects that must carry regular use in homes or commercial spaces. Slots adjustable in 1/2 inch increments let installers align shelves across multiple cabinets or sections, giving storage runs a clean, level appearance while fitting specific product or garment heights. Stamped numbers on the face of the pilaster turn that adjustment pattern into a repeatable system, so a given number on the left and right side yields the same shelf position without constant tape measurements. Pre-drilled screw or nail holes every 6 inches on center further support that repeatability, as standards across a wall can share common fastener spacing for a uniform attachment pattern. Using 23-gauge high strength steel provides a balance of slim profile and strength, helping the pilaster stay straight during fastening and under load, which supports long-term alignment of brackets and shelves.
Knape and Vogt 255 WH 18 is a heavy duty pilaster standard for adjustable shelving, so it serves as the slotted vertical track that supports shelf brackets in cabinets and storage installations.
The 255 WH 18 standard is 18 inches long, which suits shorter cabinet interiors or partial-height storage sections where full-length pilasters are unnecessary.
The KV255 pilaster measures 5/8 inch wide by 3/16 inch deep, so it sits close to the cabinet side while still providing a defined track for shelf supports.
Slots adjustable in 1/2 inch increments let installers position shelves in small, predictable steps, making it easier to align storage heights across multiple cabinets.
Pre-drilled screw or nail holes 6 inches on center offer regular fastening points, which help keep several pilasters aligned and can speed layout during installation.
The 255 WH 18 uses 23-gauge high strength steel with a white finish, giving a slim but strong profile that blends with light-colored cabinet or closet interiors.
The Knape and Vogt 255 WH 18 heavy duty pilaster standard brings BHMA Grade 1 compliant performance, 5/8 inch wide by 3/16 inch deep dimensions, and 1/2 inch adjustment slots to adjustable shelving layouts. For cabinet shops, closet systems, or storage projects needing reliable, repeatable shelf support positions in an 18 inch height, this white 23-gauge high strength steel KV255 standard provides a consistent track that ties directly into established Knape and Vogt shelf support patterns.
Sold In: 1 Each
