Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
48 inch KV255 pilaster standard from Knape and Vogt is a heavy-duty steel shelf standard that supports adjustable shelving runs in closets, cabinets, or storage walls. The 48 inch length helps span typical cabinet interiors or reach between floor and mid-height shelving, giving installers flexibility when laying out vertical supports. The standard is 5/8 inch wide and 3/16 inch deep, so it fits narrow cabinet side walls while still giving enough bearing surface for shelf supports. Steel standards use 23-gauge high strength steel, which provides a solid track for brackets under normal woodworking loads. The brass-look finish gives the face of the standard a warm metallic appearance, which works well when the standard remains visible on finished cabinetry or closet interiors.
The 48 inch KV255 heavy-duty steel pilaster standard installs using pre-drilled screw or nail holes set 6 inches on center, which creates a predictable fastening pattern along the length of the run. This spacing supports even load distribution into cabinet sides or wall studs, important when shelving will carry varied loads over time. The slim 5/8 inch by 3/16 inch profile gives room to align the standard near the front edge or slightly recessed, helping coordinate with door overlays or face frames. Slots that accept supports on 1/2 inch increments allow installers to set brackets at matched heights across multiple standards, improving shelf alignment and reducing the need to rework mis-leveled shelves.
The 48 inch length of the KV255 brass look steel standard suits mid-height cabinets, tall pantry interiors, and many closet sections where continuous adjustability is needed without running from floor to ceiling. The brass-look finish allows the standard to sit in open view alongside matching or contrasting hardware, useful in closets or built-ins where hardware is part of the finished look. As part of the KV255 family, this 48 inch option works alongside other available lengths from 12 inch to 96 inch, enabling consistent appearance and slot spacing across mixed-height sections in the same project. The 5/8 inch width makes it practical in cabinet carcasses where side material may be limited, letting installers maintain structural integrity while gaining full-length bracket engagement.
Slots on the KV255 standard are arranged to give 1/2 inch increment adjustments for supports, which allows fine control over shelf spacing when working around hinges, drawer slides, or tall stored items. Stamped numbers along the standard play a direct role during installation, because matching the same number for each side of a shelf position keeps that shelf level without separate layout marks. BHMA Grade 1 compliance indicates the standard follows a recognized performance level, important on projects where consistent service over time is expected. The 23-gauge high strength steel resists deformation at the slot edges as brackets are moved, supporting repeated layout changes during trimming or when the end user changes shelf positions. Pre-drilled screw or nail holes 6 inches apart create an even fastening rhythm, aiding straight alignment along a reference edge while distributing loads into the substrate. Across the KV255 line, the range of available lengths gives designers and installers a unified system, so the same adjustment behavior appears at every elevation in a room.
The 255 BR 48 version of the KV255 standard is 48 inches long, which suits many cabinet interiors and mid-height closet sections where full adjustability is needed over a moderate vertical span.
The KV255 standard is 5/8 inch wide and 3/16 inch deep, so it occupies minimal cabinet space while still presenting a defined track for shelf supports along the side panel.
The steel version of the KV255 standard uses 23-gauge high strength steel, providing a solid structure for repeated shelf adjustments in typical woodworking and storage applications.
The KV255 standard has slots that accept supports in 1/2 inch increments, letting you raise or lower shelves in small steps to clear hardware and match user preferences.
Pre-drilled screw or nail holes spaced 6 inches on center provide a consistent fastening pattern, helping keep the standard straight and distribute shelf loads into the cabinet or wall.
BHMA Grade 1 compliance indicates the KV255 standard meets a recognized performance level, supporting use in projects where tested, graded shelf hardware is desired.
The 48 inch KV255 heavy-duty steel pilaster standard in brass-look finish combines BHMA Grade 1 compliance, 23-gauge high strength steel, and 1/2 inch adjustment slots to support precise, repeatable shelving layouts. With 5/8 inch by 3/16 inch dimensions and pre-drilled fastening holes 6 inches on center, it fits cabinet and closet projects that demand organized vertical support without wasting interior space. For jobs that call for a consistent brass-toned appearance and fine shelf adjustability using the KV255 system, this 255 BR 48 standard matches those requirements.
Sold In: 1 Each
