Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
18" KV255 heavy-duty pilaster standard is an 18 inch Knape and Vogt 255 BR 18 steel standard that supports adjustable shelving in closets, cabinets, and storage runs. The 5/8 inch wide x 3/16 inch deep profile fits tightly along cabinet sides, helping installers keep vertical lines straight while maintaining a compact footprint. BHMA Grade 1 compliance means the standard is built to a performance level suited for demanding shelf applications. Brass look finish matches brass-tone layouts, so exposed runs can align with other brass-colored hardware in the project. The steel standard uses 23-gauge high strength steel, giving shelf supports a solid mounting backbone. Slots set in 1/2 inch increments let you place shelf brackets at consistent heights, which reduces layout guesswork across a run of standards. Stamped numbers along the standard assist with repeatable shelf positioning from cabinet to cabinet or side to side.
The Knape and Vogt 255 BR 18 standard is drilled for screw or nail mounting, giving flexibility to fasten into cabinet sides or wall studs using common shop methods. Pre-drilled holes every 6 inches on center reduce layout steps, because fastening points are already marked and spaced for you. The narrow 5/8 inch width helps the standard nest close to the side panel, which is useful in face frame or frameless cabinets where interior clearance matters. Slots spaced at 1/2 inch increments allow installers to fine-tune shelf height, then repeat that same setting by reading the stamped numbers. Recommended KV255-8 nails, sold separately, provide a matched nail option for those choosing nail attachment. With a 23-gauge high strength steel body, the standard gives shelf brackets a consistent, rigid track to engage.
The 18 inch length suits shorter cabinet interiors, small closets, or shelving bays where full-height standards are not required. At 5/8 inch wide and 3/16 inch deep, the KV255 brass look pilaster standard fits along cabinet sides without taking significant space from the opening, which supports tighter layouts. BHMA Grade 1 compliance positions this standard for projects where verified performance levels matter, such as commercial casework or higher-use residential storage. The brass look finish coordinates with brass-tone rods, pulls, or other trim, so visible standards can become a deliberate design element rather than an afterthought. Slots running the full working length give flexibility to place shelves wherever needed within the 18 inch span, which works well in cabinets that need a limited range of adjustable positions rather than floor-to-ceiling adjustability.
Slots adjustable in 1/2 inch increments let installers shift shelves by small, predictable steps, which helps optimize spacing for different items without re-drilling structure. Stamped numbers alongside these slots provide a simple way to set matching shelf heights on left and right standards, improving accuracy across pairs and reducing the chance of a rocking shelf. Pre-drilled screw or nail holes spaced 6 inches on center support a regular fastener pattern, which distributes load along the length of the standard while also speeding installation because there is no need to mark each hole. The 23-gauge high strength steel construction gives a sturdy track for shelf brackets to lock into, supporting the intent of a heavy-duty standard. By combining clear markings, tight spacing increments, and a slim profile, this 18 inch KV255 heavy-duty pilaster standard supports repeatable setups across multiple cabinets or closet sections.
The 18 inch KV255 heavy-duty pilaster standard measures 5/8 inch wide by 3/16 inch deep, which helps it fit neatly along cabinet or closet sides without using excess interior space.
The 18 inch KV255 heavy-duty pilaster standard has slots adjustable in 1/2 inch increments, allowing small, consistent changes in shelf height so pairs of standards stay aligned easily.
The 18 inch KV255 heavy-duty pilaster standard uses 23-gauge high strength steel, providing a solid track for supports where steel construction is preferred for shelf structure.
The 18 inch KV255 heavy-duty pilaster standard has pre-drilled screw or nail holes 6 inches apart on center, which simplifies mounting and promotes even load distribution into the substrate.
The 18 inch KV255 heavy-duty pilaster standard is BHMA Grade 1 compliant, indicating it is built to a performance level intended for demanding shelf and storage applications.
The 18 inch KV255 heavy-duty pilaster standard lists KV255-8 nails, sold separately, as recommended fasteners, giving installers a matching nail option for nail-based mounting.
The 18 inch Knape and Vogt 255 BR 18 standard combines BHMA Grade 1 compliant performance, brass look finish, and 5/8 inch by 3/16 inch steel construction for adjustable shelving in shorter runs. With 1/2 inch slot increments, stamped numbers, and pre-drilled screw or nail holes at 6 inch centers, it supports accurate, repeatable shelf positioning. For projects calling for brass-tone hardware and a compact heavy-duty pilaster track, this 18 inch KV255 heavy-duty pilaster standard offers a focused option for closets, cabinets, and other storage installations.
Sold In: 1 Each
