Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KV255 heavy-duty steel pilaster standard gives you a 72 inch vertical shelf standard designed for adjustable shelving runs in closets, cabinets, or storage walls. The 72 inch length supports tall sections, so you can span from near floor to upper cabinet or ceiling in many builds. The standard is 5/8 inch wide and 3/16 inch deep, so it fits easily along cabinet sides or wall studs without taking much lateral space, which helps preserve usable shelf width. Steel standards are made from 23-gauge high strength steel, so they provide a sturdy track for compatible supports in typical woodworking and storage installations. The zinc finish gives the standard a neutral metallic look that blends with many shop and residential interiors while resisting typical handling and installation wear during layout and fastening.
The 72 inch KV255 steel pilaster standard uses pre-drilled screw or nail holes spaced 6 inches on center, so fastening points line up in a predictable pattern down the length. This spacing supports quick planning of fastener locations into studs or cabinet gables without separate marking at every position. Slots for shelf supports are on 1/2 inch centers, so you can shift shelves up or down in small, regular steps to fine-tune clearances. Stamped numbers along the standard tie to these slot positions, giving a visual reference between left and right standards so shelves sit level. The 5/8 inch width and 3/16 inch depth allow the standard to sit close to the wall or cabinet side, which helps shelves seat properly on the supports without large stand-off from the mounting surface.
The KV255 standard at 72 inches long works well for full-height or near full-height storage runs in closets, pantries, or tall utility cabinets. Its classification under shelf, closet, and garage organization and shelf brackets and standards places it in typical adjustable shelving systems where vertical tracks support brackets. The narrow 5/8 inch wide profile lets the standard run along face-frame stiles or panel edges while keeping the hardware line discreet, which helps maintain clean cabinet or closet lines. The 3/16 inch depth keeps the standard close to the mounting surface, so shelf supports project a consistent distance, helping shelves sit square against the wall or gable.
Steel standards made from 23-gauge high strength steel provide a robust path for load transfer from shelf supports into the wall or cabinet carcase, which matters when planning heavier or more frequently adjusted shelves. The zinc finish presents a practical surface for shop or residential environments where the standards may be visible inside open shelving. BHMA Grade 1 compliance indicates the standard follows a recognized level of performance, which supports use in demanding storage layouts. Slots set at 1/2 inch increments let you position shelves for specific bin heights or door clearances, while the stamped numbers help keep matching slots aligned across multiple standards so shelves install straight and can be re-positioned later without re-measuring.
The 1/2 inch increment slot spacing on the KV255 standard provides a consistent adjustment rhythm for each shelf, which simplifies repeated layouts across several cabinets or closet bays. When installers use the stamped numbers beside the slots, they can match number to number across each standard, reducing the chance of a shelf sitting out of level. The pre-drilled screw or nail holes every 6 inches on center create a regular fastening pattern that helps distribute loads more evenly along the 72 inch length, supporting stable long-term use.
The 23-gauge high strength steel construction maintains the shape of the standard as loads from shelves transfer through the supports, which matters when shelves are adjusted repeatedly or subject to variable loads. The zinc finish lends the standard a neutral appearance while providing a practical surface for typical interior environments where metal hardware contacts wood. Available lengths in the same KV255 family range from 12 inches to 96 inches, allowing layouts that mix shorter and taller sections using the same slot and numbering pattern, which supports system-based planning across an entire project.
The KV255 255 ZC 72 standard is 72 inches long, so it suits tall storage sections where you want multiple adjustable shelf positions along a single vertical run.
The standard is 5/8 inch wide and 3/16 inch deep, which lets it mount close to cabinet sides or walls while keeping the hardware line narrow.
The KV255 steel standard is made from 23-gauge high strength steel, giving a sturdy track for shelf supports in typical woodworking and storage applications.
The KV255 standard has slots for supports adjustable in 1/2 inch increments, which lets you fine-tune shelf heights to match stored items or door clearances.
Stamped numbers mark slot positions along the standard, helping align shelves across multiple standards so each shelf sits level from side to side.
The KV255 standard has pre-drilled screw or nail holes 6 inches apart on center, giving consistent fastening points down the length for predictable attachment.
The KV255 heavy-duty steel pilaster standard in the 72 inch 255 ZC 72 version combines 23-gauge high strength steel, a zinc finish, and 1/2 inch increment slots to support adjustable shelving runs. With BHMA Grade 1 compliance, stamped slot numbers, and pre-drilled 6 inch on-center fastening holes, it ties measurement, alignment, and fastening into one system. For projects using Knape and Vogt shelf standards and brackets, this 5/8 inch wide, 3/16 inch deep track gives a consistent base to plan tall closet, cabinet, or storage wall sections where repeatable shelf positions matter.
Sold In: 1 Each
