
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
96 inch KV255 steel pilaster standard gives you a full-height Knape and Vogt shelf support run, so tall pantry or closet sections can use one continuous track instead of staggered pieces. The 5/8 inch wide by 3/16 inch deep profile keeps the standard slim, which helps it sit neatly in cabinet sides or closet panels without removing too much material. Heavy-duty steel construction defines this as a load-focused pilaster, giving installers a standard built to handle demanding shelving layouts when matched with appropriate brackets. The almond finish on this 255 ALM 96 standard blends with light-colored interiors, which helps the hardware recede visually in painted or melamine cabinet and closet work. As a shelf standard within the Shelf, Closet & Garage Organization family, it fits projects where adjustable storage layout is part of the design.
This 96 inch KV255 heavy-duty steel pilaster standard is drilled for mounting with fasteners at 6 inch centers, so you can plan your fastening points in advance along cabinet sides or framing. The pre-drilled pattern accepts screws or nails, which gives flexibility when working in shops that standardize on one fastener type for casework versus site-built framing. Slots set at 1/2 inch increments keep bracket engagement repeatable, so once you establish a reference mark, the rest of the shelf layout follows those marks without recalculating heights. The narrow 5/8 inch by 3/16 inch profile leaves more meat in the substrate, which is useful on cabinetry where side panels are not overly thick. Stamped numbers along the length act as quick alignment guides when setting pairs of standards, helping installers hold consistent shelf elevations across multiple sections.
The 96 inch KV255 steel pilaster standard in almond finish fits tall cabinet interiors, closet runs, and similar storage projects where a single, continuous track is preferred over stacking shorter standards. Working within the Shelf Standards & Brackets product class, it ties directly into Knape and Vogt shelf brackets designed for slotted standards, so the track becomes the fixed reference for adjustable shelving. The 5/8 inch width keeps the standard compact for side-panel mounting in built-ins, while the 3/16 inch depth suits typical dado or surface-mount applications in shop-fabricated casework. Because the standard is BHMA Grade 1 compliant, it aligns with specifications that call for performance-tested hardware in commercial or higher-use environments, keeping the shelving system consistent with other grade-labeled components. The almond finish coordinates with light laminates and painted interiors, supporting design-driven projects where visible hardware should blend with the casework.
Stamped numbers on the 255 ALM 96 pilaster standard create a common language for layout across the crew, so one person can call out positions and others can match brackets or opposing standards without measuring each shelf location again. Slots set in 1/2 inch increments allow small, predictable adjustments, which helps when leveling shelves over uneven floors or aligning shelves to door rails, trims, or appliance heights. The pre-drilled screw or nail holes spaced 6 inches apart on center provide evenly distributed fastening points, helping keep the pilaster flat to the mounting surface and supporting bracket loads across the full 96 inch length. Using 23-gauge high strength steel for the standard gives a stable track for bracket engagement, which supports repeated repositioning of shelves throughout the life of the installation. Being part of the Knape and Vogt KV255 model family ties this standard to a known system, so dimensions, slot spacing, and performance expectations match other KV255 components across different lengths and finishes.
The 96 inch KV255 heavy-duty steel pilaster standard measures 5/8 inch wide by 3/16 inch deep, which helps it fit neatly in cabinet sides and closet panels without removing excessive material.
The 1/2 inch slot spacing on the KV255 standard lets you fine-tune shelf positions in small steps, helping align shelves with trims, clearances, and other hardware while keeping measurements simple.
BHMA Grade 1 compliance on this KV255 pilaster indicates it meets a recognized performance level, which is valuable on projects where shelf systems see frequent use over time.
The 255 ALM 96 KV255 pilaster has pre-drilled holes 6 inches apart on center, giving a consistent fastening pattern that simplifies marking, drilling, and securing the standard along its full length.
This KV255 steel standard uses 23-gauge high strength steel, providing rigidity for the bracket slots and supporting demanding shelving layouts when used within the system design.
The 96 inch KV255 pilaster standard lists KV255-8 nails as recommended fasteners, giving an option matched to the hole pattern for straightforward attachment in suitable substrates.
The 96 inch KV255 heavy-duty steel pilaster standard in almond finish gives you a full-height, BHMA Grade 1 compliant track with 1/2 inch shelf adjustment and a 5/8 inch by 3/16 inch profile. With stamped numbers, pre-drilled 6 inch on-center holes, 23-gauge high strength steel, and a finish suited to light interiors, it fits both shop-built casework and on-site storage upgrades. For projects needing an adjustable Knape and Vogt shelving system in a 96 inch run, this 255 ALM 96 pilaster standard aligns cleanly with performance and layout requirements.
Sold In: 1 Each