
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
60 inch KV255 pilaster standard defines this Knape and Vogt vertical shelf standard, so installers get a continuous 5/8 inch wide x 3/16 inch deep track that spans tall cabinet, closet, or storage applications without splicing segments. The almond finish ties into light-colored casework, which helps this standard blend into interiors where exposed hardware is visible along cabinet sides. Steel standards are made from 23-gauge high strength steel, giving the KV255 profile the rigidity needed to support properly matched shelf brackets in typical woodwork projects. This model is BHMA Grade 1 compliant, so it follows a recognized performance standard and fits commercial or higher-duty applications where rated components are preferred. Being a Knape and Vogt part, the 255 ALM 60 part number clearly identifies the almond, 60 inch version within the KV255 system, which simplifies specification and reordering when matching existing runs in a project.
The 60 inch length on the 255 ALM 60 gives enough vertical span for full-height cabinet interiors, so installers can run one continuous standard instead of stacking shorter pieces. Pre-drilled screw or nail holes set 6 inches apart on center simplify layout, because each fastener point is already aligned on the centerline of the pilaster and spaced evenly down the run. Recommended fasteners are KV255-8 nails, sold separately, which ties the standard to a specific fastening option that matches the manufacturer guidance. Slots for supports adjustable in 1/2 inch increments let shelf brackets engage securely while still giving installers flexibility to hit exact shelf elevations that coordinate from cabinet to cabinet.
The KV Model KV255 standard with a 60 inch length fits projects where a tall run of shelving is required, such as full-height closets, pantry cabinets, or utility enclosures. Its 5/8 inch wide x 3/16 inch deep dimension allows it to sit along cabinet sides without taking excessive space, which is useful in narrow interior widths. The almond finish works with almond or similar light finishes in residential or commercial millwork, giving a coordinated look when standards remain visible. Being part of the Shelf Standards and Brackets product class, this pilaster standard forms the vertical track that supports shelf brackets in a typical adjustable shelving system. Available finishes within the KV255 line, such as almond, brass-look, brown, natural aluminum, white, and zinc, help designers and installers keep a consistent appearance across different projects while staying in the same mechanical family.
BHMA Grade 1 compliant construction on the KV255 standard supports repeatable performance, which is important when multiple bays of shelving must behave the same under load across a job. Steel standards made from 23-gauge high strength steel give each upright the structural backbone to carry the bracket system as intended, helping reduce deflection along tall runs. Slots for supports adjustable in 1/2 inch increments make it straightforward to align shelves from left to right, because installers can count slot steps or use the stamped numbers as a clear reference. Those stamped numbers make installation easier by acting like built-in measuring marks, so the same number can be used on each standard to keep bracket pairs at the same height. Pre-drilled screw or nail holes spaced 6 inches apart on center establish a consistent fastening rhythm, which helps keep standards straight and simplifies hitting structural material behind the mounting surface. The clearly defined Manufacturer Part Number 255 ALM 60 identifies the almond, 60 inch version, so replacement or expansion standards can match the exact height and finish already installed on site.
The 255 ALM 60 standard is 60 inches long, which suits full-height cabinet or closet interiors where a continuous vertical shelf track is needed without jointed sections.
The KV255 pilaster standard is 5/8 inch wide by 3/16 inch deep, so it occupies minimal side space while still providing a defined track for shelf supports.
The 60 inch KV255 standard uses steel standards made from 23-gauge high strength steel, giving the vertical track rigidity for supporting compatible shelf brackets.
The KV255 slots for supports are adjustable in 1/2 inch increments, allowing shelf heights to be stepped up or down in small, predictable moves during layout.
The KV255 stamped numbers make installation easier by giving a visible reference point, so matching numbers on opposing standards keeps shelf brackets level.
Pre-drilled screw or nail holes 6 inches apart on center offer evenly spaced fastening points, helping standards track straight along the mounting surface.
The 60 inch KV255 pilaster standard in almond from Knape and Vogt brings BHMA Grade 1 compliant performance, a 5/8 inch wide x 3/16 inch deep profile, and 1/2 inch incremental adjustment together in one part. For tall cabinetry, closets, or utility storage needing adjustable shelves, the 255 ALM 60 length, almond finish, and 23-gauge high strength steel construction align well with typical woodwork layouts. Use these verified details to match this KV Model KV255 standard to projects that call for a continuous, clearly indexed shelf support track.
Sold In: 1 Each