
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
KV256 steel shelf support clip gives a defined support point for shelving, so cabinet and closet runs can be laid out around a consistent bearing. The clip is designed for use with KV255 pilasters, so it ties directly into that standard track layout for straightforward planning. The clip measures 5/8 inch wide and 3/4 inch in length, which creates a compact support footprint that works within common cabinet and closet pilaster spacing without crowding adjacent hardware. The zinc plated steel construction provides a hard metal bearing surface, so loaded shelves rest on metal, not wood fibers, helping maintain the support point over repeated loading. The Knape and Vogt 256 ZC designation identifies the part within the KV255 system, which simplifies matching new work or service replacements to existing installations that already use KV255 pilasters.
The KV256 steel shelf support clip is sized at 5/8 inch wide and 3/4 inch in length, which gives installers a small, repeatable contact patch on the underside of the shelf. Used with KV255 pilasters, the clip drops into the pilaster layout so shelf positions follow the pilaster hole spacing. The defined dimensions help drafters and shop personnel account for shelf setback from the pilaster face when they are laying out cabinet or closet interiors. The zinc plated steel construction keeps the support profile thin relative to its bearing capacity, so shelf adjustments along the KV255 pilasters can be made without reworking surrounding case parts.
The 3/4 inch KV256 steel shelf support clip is used wherever KV255 pilasters are part of the hardware layout, so it fits directly into shelf, closet, and garage organization projects that already rely on that track standard. In shelf standards and brackets applications, the clip sets the point where the shelf meets the KV255 pilaster, so cabinet builders can tie adjustable shelving into the same hardware family. Because the clip measures 5/8 inch wide, it occupies only a small section of the pilaster, which is useful in tall closet systems where multiple shelves stack within a narrow vertical run. The 3/4 inch length projects enough to seat a typical shelf edge on metal, so the working load is transferred into the pilaster rather than into the cabinet side panel alone. The zinc plated finish on the steel gives the bearing surface a consistent feel as the shelf is set down, which helps installers read when the shelf is fully resting on the clip during final placement.
The BHMA Grade 1 rating, when the KV256 clip is used with KV255 pilasters, signals that this clip participates in a heavy-duty shelf standard, so designers can align it with demanding storage layouts that rely on the KV255 system. The Knape and Vogt 256 ZC identification holds the dimensions and geometry consistent from job to job, which allows shops to repeat cabinet and closet designs without rechecking support details each time. Because the clip is specified as steel with a zinc plated finish, the supporting edge remains rigid under typical shelf loads, so the contact point between the shelf and the KV255 pilaster stays where it was drawn. Full box quantities of 100 and 1,000 allow project managers to schedule installation around predictable counts, so each KV255 pilaster bay can receive matching KV256 support clips without splitting orders between different product lines.
The KV256 steel shelf support clip is designed for use with KV255 pilasters, so it fits directly into shelf standards and brackets layouts that use KV255 components.
The Knape and Vogt 256 ZC shelf clip measures 5/8 inch wide by 3/4 inch in length, setting a compact shelf bearing area for planning clearances and shelf overhang.
The shelf support clip is made from steel with a zinc plated finish, providing a hard metal support surface at the pilaster contact point for typical shelf loads.
BHMA Grade 1 applies when the KV256 clip is used with KV255 components, tying the support system to a recognized heavy-duty shelf performance standard.
The 3/4 inch length provides a defined projecting ledge, so shelves sit on a consistent steel bearing point that transfers load into the KV255 pilaster.
KV256 steel shelf support clips are offered in standard box quantities of 100 and 1,000, with discount available for full box quantity orders and bulk boxes in full quantities only.
The KV256 steel shelf support clip, sized at 5/8 inch wide by 3/4 inch in length, ties directly to KV255 pilasters and BHMA Grade 1 performance when used with KV255 components. For cabinet, shelf, closet, and garage organization layouts built around KV255 pilasters, choosing the Knape and Vogt 256 ZC clip aligns the shelf bearing point with that established standard. Order the standard box quantity that matches the number of KV255 pilaster bays in your project to keep each shelf support position using the same zinc plated steel clip.
Sold In: 1 Each