Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
84 inch KV255 pilaster standard from Knape and Vogt is a heavy-duty aluminum shelf standard designed to support adjustable shelving runs in closets, garages, and storage walls. The KV255 model identification ties this standard directly to Knape and Vogt hardware families, which helps align it with compatible KV shelf brackets during layout and installation. The 255AL 84 designation specifies an 84 inch length in natural aluminum, so installers can plan tall vertical runs from floor to near-ceiling in typical residential or light commercial spaces. The natural aluminum finish gives a clean, neutral appearance that blends easily with a wide range of shelf materials in open or closed cabinetry. As part of the Shelf Standards and Brackets class, this pilaster standard provides the vertical track that carries the actual shelf supports, so its length and material directly influence how much load and adjustment range each shelving bay can deliver.
This 84 inch KV255 aluminum pilaster standard uses pre-drilled screw or nail holes spaced 6 inches on center to anchor the standard to the supporting structure. That fixed spacing pattern allows installers to quickly line up fasteners with framing or blocking, which simplifies layout across multiple standards in a row. The recommended fasteners are KV255-8 nails, sold separately, so specifiers can match their fastening schedule to the manufacturer guidance when setting up project documents. With a 5/8 inch wide face and 3/16 inch depth, the standard seats close to the mounting surface, which helps shelves and brackets sit near the wall while still engaging securely in the slots. Because the slots accept supports in 1/2 inch increments, the mounted standard provides dense vertical adjustment once fastened, allowing shelving heights to be tuned after the track is fixed in place.
This 255AL 84 aluminum pilaster standard belongs to the Shelf, Closet and Garage Organization category, positioning it for use in built-in closet systems, garage storage, and other wall-mounted shelving projects. The 84 inch length suits tall sections where a single standard can span from low storage zones up to high shelves, supporting everything from seasonal items to everyday gear in the same run. Because the standard is part of the KV255 model family, it is intended to work within Knape and Vogt shelf standards and brackets systems, tying into matching supports for a consistent installation approach. The natural aluminum finish helps it visually coordinate with metal brackets and a range of shelf materials, from painted boards to laminated panels, which matters in open installations where hardware remains visible.
Material construction for this series distinguishes aluminum versions as 17-gauge aluminum standards, compared to 23-gauge high strength steel for steel variants, so buyers can select aluminum when they prefer this material in their project environment. In practice, the 5/8 inch wide face and 3/16 inch depth create a low-profile track that fits neatly along cabinet interiors or wall surfaces while still providing enough section to carry shelf loads through the bracket interface. Since the KV255 line offers multiple available lengths from 12 inches up to 96 inches, the 84 inch size fits projects that need near full-height coverage without going to the maximum length, which can streamline transport on site and match typical ceiling heights. Within a single project, installers can combine this 84 inch standard with other lengths from the same KV255 family to handle shorter sections, such as above desks or counters, while maintaining a consistent slot pattern and appearance.
The slot pattern on this KV255 standard is adjustable in 1/2 inch increments, which directly affects how precisely shelf heights can be set and reset over the life of the installation. In practical terms, that tight spacing lets installers respond to changing storage needs without relocating the pilaster, moving brackets only one or two notches to fine-tune vertical clearances. Stamped numbers along the length work as a visual index, so installers and maintenance staff can quickly match left and right bracket positions by number rather than by repeated measuring, which speeds up both initial setup and later reconfiguration. BHMA Grade 1 compliance provides a defined performance benchmark that supports use in demanding environments, such as busy closets or storage rooms where shelves are frequently adjusted and loaded.
Pre-drilled screw or nail holes every 6 inches on center establish a regular fastening rhythm, which helps keep each standard plumb and consistently anchored as multiple units are installed along a wall. That predictable hole spacing also simplifies drawing details and jobsite layout, because the fastening pattern remains the same across all KV255 lengths, including this 84 inch version. The 5/8 inch by 3/16 inch profile means brackets seat close to the wall, which reduces leverage on the fasteners and keeps shelf edges nearer to the mounting surface, contributing to a more compact installation. With 17-gauge aluminum construction for aluminum standards, this 255AL 84 model offers a combination of strength and reduced weight typical for that gauge, which can be helpful when handling tall standards during overhead work or when lifting multiple pieces throughout the day.
The 255AL 84 standard has an 84 inch length, which supports tall vertical shelving runs and allows multiple shelf levels to be laid out within a single continuous pilaster.
The KV255 pilaster has a profile of 5/8 inch wide by 3/16 inch deep, giving a slim track that conserves cabinet or closet space while still supporting shelf brackets.
The 255AL 84 standard provides adjustable slots in 1/2 inch increments, allowing fine shelf height changes so storage can be tuned for different contents over time.
The KV255 84 inch standard has pre-drilled screw or nail holes every 6 inches on center, which simplifies consistent anchoring into studs or backing along the run.
This version is an aluminum standard made from 17-gauge aluminum, giving a balance of strength and lighter handling compared to many thicker steel components.
The KV255 pilaster standard is BHMA Grade 1 compliant, indicating it meets a recognized performance level for demanding adjustable shelving and storage applications.
The 84 inch KV255 heavy-duty aluminum pilaster standard in natural aluminum finish gives installers a tall, slim track with 1/2 inch slot increments, stamped numbers, and 6 inch on-center fastening holes. Those details support efficient layout, reliable anchoring, and precise shelf adjustment in closet, garage, or general storage projects. When a project calls for BHMA Grade 1 compliant adjustable shelving, this 255AL 84 standard from Knape and Vogt offers a clearly defined length, profile, and material choice to specify and deploy across matching storage runs.
Sold In: 1 Each
