Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KV255 heavy-duty steel pilaster is a 36 inch Knape and Vogt shelf standard designed to support adjustable shelving runs in cabinets, closets, and storage projects. The 5/8 inch wide by 3/16 inch deep profile fits narrow stile or panel applications where space is tight yet vertical strength is needed for repeated shelf repositioning. The almond finish matches light cabinetry and closet interiors, so the standard blends into finished work while still clearly showing slot locations. Made from 23-gauge high strength steel, the pilaster standard is built to handle frequent shelf adjustments under load without deforming at the slot edges. BHMA Grade 1 compliant construction signals that the standard is engineered to a rigorous performance level, which matters on high-use storage installations. The 36 inch length suits typical base cabinet, wall cabinet, and mid-height closet sections where full-height standards are not required.
The 5/8 inch wide by 3/16 inch deep KV255 pilaster format seats neatly on cabinet or closet wall surfaces, so installers can run the standard flush without heavy shimming. Pre-drilled screw or nail holes every 6 inches on center let installers pattern fasteners along studs or solid panels, which simplifies layout on repetitive runs. Slots for supports adjustable in 1/2 inch increments reduce measuring during installation, because shelf heights can be tuned directly off the stamped numbers instead of separate marks. The BHMA Grade 1 compliant steel construction supports repeat adjustments while maintaining slot shape, which matters when users move shelves to adapt storage over time.
This 36 inch Knape and Vogt pilaster standard is suited to cabinet interiors, closet sections, and storage bays that need an adjustable shelf system within a mid-height vertical span. The 5/8 inch wide by 3/16 inch deep profile allows mounting along cabinet sides or partitions without taking up excessive interior width, which is useful when clear space for pull-out bins or wide items is important. Almond finish integrates with light-colored cabinetry, laminate interiors, and closet systems so the hardware does not visually dominate the compartment. Because the steel standards are made from 23-gauge high strength steel, they support repeated loading cycles in kitchens, laundry rooms, pantries, or shop storage where shelves are expected to move as contents change.
BHMA Grade 1 compliant design means the KV255 heavy-duty steel pilaster follows a recognized performance level for shelf standards, which matters when specifying hardware for projects that will see constant use. Slots for supports that adjust in 1/2 inch increments make this standard practical for installations where exact alignment to appliances, countertop edges, or fixed trim is important, since shelves can be raised or lowered in small, predictable steps. Stamped numbers along the face of the standard give installers and end users clear reference points for shelf positions, helping them match heights between opposing standards quickly and keeping multiple units in a run consistent. Pre-drilled screw or nail holes spaced 6 inches on center support an even fastening pattern, which helps distribute loads along the cabinet or wall surface for stable, long-term service.
The KV255 heavy-duty steel pilaster is 5/8 inch wide by 3/16 inch deep and 36 inches long, so it fits slim cabinet sides while still providing enough depth for secure fastening.
The KV255 pilaster has pre-drilled screw or nail holes spaced 6 inches on center, which helps maintain consistent fastener spacing along studs or solid cabinet panels.
The KV255 heavy-duty steel pilaster has slots for supports adjustable in 1/2 inch increments, allowing fine tuning of shelf heights to clear appliances, trim, or storage bins.
This 36 inch KV255 pilaster uses 23-gauge high strength steel, giving the standard rigidity for repeated shelf adjustments and vertical loading in cabinet or closet installations.
BHMA Grade 1 compliant indicates the KV255 pilaster standard is engineered to a high performance level, which supports demanding shelving applications with frequent use.
The KV255 heavy-duty steel pilaster is recommended for use with KV255-8 nails, aligning the standard design with a fastener choice matched to the pre-drilled holes.
The 36 inch KV255 heavy-duty steel pilaster in almond finish provides an adjustable shelf standard that suits common cabinet and closet heights while preserving interior space. The 5/8 inch wide by 3/16 inch deep profile, BHMA Grade 1 compliant steel construction, and 1/2 inch increment slots combine to support precise, repeatable shelf placement. Stamped numbers and pre-drilled 6 inch on-center mounting holes help streamline layout for professional installers and serious DIY users building organized storage runs.
Sold In: 1 Each
