Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
24 inch KV255 pilaster standard gives you a heavy-duty vertical track for supporting adjustable shelving in cabinets, closets, or storage runs where a 24 inch length matches the opening. Knape and Vogt brands this model as KV255, so it ties directly to a well-known shelf standard system used in woodworking projects. The standard is 5/8 inch wide by 3/16 inch deep, so it stays low-profile while still providing a defined surface for shelf supports to lock into. Steel standards are made from 23-gauge high strength steel, which provides a rigid track that resists flexing when set into casework. Slots for supports are adjustable in 1/2 inch increments, so shelf clips can be moved up or down in predictable steps. Stamped numbers on the pilaster standard align those increments, which helps set matching shelf heights across multiple standards during layout.
The almond finish shelf standard is formed with pre-drilled screw or nail holes 6 inches on center, so the installer has repeatable fastening points from top to bottom of the 24 inch length. Those evenly spaced holes support a straight, plumb installation line when driving fasteners into cabinet sides or wall backing. Slots for supports are adjustable in 1/2 inch increments, so shelf brackets or clips can be repositioned without altering the mounted standard. The 5/8 inch width works within typical cabinet side dimensions, so the track can sit near the front or back while still leaving room for shelving material. The BHMA Grade 1 compliant rating defines a performance classification for this standard, which helps specifiers align it with commercial or higher-duty storage applications that call for that grade level.
The 255 ALM 24 pilaster standard, at 24 inches long, fits cabinets or storage areas where the usable vertical interior height falls around that size, so the track can run most of the side panel. Its 5/8 inch wide by 3/16 inch deep profile sits neatly along cabinet walls, which suits both narrow pantry sections and general-purpose shelving bays. With an almond finish, this steel pilaster standard works in interiors that favor a light, neutral color, keeping hardware from visually dominating the space. Steel standards use 23-gauge high strength steel, so they provide a solid path for load transfer from shelf supports into the case side. Since this product falls under shelf standards and brackets within shelf, closet, and garage organization, it suits projects ranging from built-in cabinets to storage fixtures in work areas where adjustable shelving is needed.
BHMA Grade 1 compliant performance gives this KV255 heavy-duty steel pilaster a rated standard, so designers can specify it where that grade is required for adjustable shelving. Slots for supports adjustable in 1/2 inch increments provide consistent vertical steps, which simplifies aligning shelf heights between opposing standards and across multiple cabinets. Stamped numbers on the face of the standard match those increments, so installers can read off the positions instead of measuring each shelf centerline, reducing layout time on repetitive runs. Pre-drilled screw or nail holes spaced 6 inches on center create a fastening pattern that helps keep the standard straight under load, since fixings are distributed from top to bottom. Recommended fasteners are KV255-8 nails sold separately, giving a named fastener option that works with the existing holes. Available finishes for this model line include almond, brass-look, brown, natural aluminum, white, and zinc, so projects using multiple lengths of KV255 can stay visually consistent across different cabinet sizes.
The 24 inch KV255 pilaster standard provides a heavy-duty vertical track for adjustable shelving, using 23-gauge high strength steel and 1/2 inch slot increments to support repeatable shelf placement in cabinets or storage units.
The 1/2 inch adjustable slots on the KV255 pilaster standard allow shelf supports to move in fixed steps, so installers can fine-tune height while keeping shelf levels consistent across multiple standards.
Stamped numbers on the KV255 pilaster standard mark slot positions, so installers can match numbers instead of measuring, which speeds layout and keeps opposing shelves aligned at the same height.
Pre-drilled screw or nail holes 6 inches on center give regular fastening points along the KV255 pilaster standard, helping it stay straight and secure over the full 24 inch length.
BHMA Grade 1 compliant rating places the KV255 pilaster standard in a defined performance category, which supports using it in applications that call for that grade of adjustable shelving hardware.
The 255 ALM 24 pilaster standard lists KV255-8 nails sold separately as recommended fasteners, so installers have a named option matched to the pre-drilled holes when planning attachment.
The 24 inch KV255 heavy-duty steel pilaster standard in almond finish combines BHMA Grade 1 compliant performance, 23-gauge high strength steel, and 1/2 inch slot increments to support adjustable shelving in a compact profile. The 5/8 inch wide by 3/16 inch deep section fits typical cabinet side constructions, while stamped numbers and 6 inch on-center fastener holes simplify layout and fastening. When an almond finish, defined 24 inch length, and the Knape and Vogt KV255 model line fit your cabinet or storage design, this 255 ALM 24 standard offers a defined track for orderly, repeatable shelf placement.
Sold In: 1 Each
