Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
30 inch KV255 pilaster standard provides a 30 inch long vertical track for supporting adjustable shelving in cabinets, closets, or storage runs. The natural aluminum finish identifies this version visually and coordinates with other natural aluminum components in a run. The KV255 model designation ties this pilaster to matching Knape and Vogt shelf supports designed for the same slot profile. The 5/8 inch wide by 3/16 inch deep cross-section keeps the standard slim while providing a defined channel for bracket engagement. Aluminum standards specified as 17-gauge aluminum give a heavier section than light trim, supporting a heavy-duty classification. BHMA Grade 1 compliance indicates the standard is tested for demanding service, which matters when shelves carry significant stored weight over time.
The pre-drilled screw or nail holes spaced 6 inches apart on center provide defined fastening points along the 30 inch standard, which helps space fasteners consistently down the run. The 6 inch spacing also balances holding power and labor by limiting how many fasteners are driven while securing the standard solidly to the substrate. The holes sized for screw or nail use allow the installer to match fasteners to the cabinet or wall material. Recommended fasteners listed as KV255-8 nails, sold separately, identify a specific nail reference, which helps match drive type across a project for consistent holding characteristics.
The 30 inch KV255 heavy-duty aluminum pilaster standard is part of the Shelf, Closet and Garage Organization family, so it fits naturally into storage builds where vertical adjustment is required. As a Shelf Standards and Brackets class component, it serves as the vertical track that receives compatible supports in a shelving system. The natural aluminum finish provides a neutral metallic appearance, which suits utility storage, workshop runs, or modern cabinet interiors that use exposed metal hardware. Because the standard is 30 inches long, it works well in mid-height cabinets, upper storage sections, or shorter closet segments where full-height standards are unnecessary. The narrow 5/8 inch profile lets it sit close to stile edges or against interior partitions, giving room for shelves while keeping hardware visually controlled.
The BHMA Grade 1 compliant rating means this KV255 pilaster standard is built and tested to a high performance level, supporting repeated shelf adjustments and loading cycles without frequent component changes. The 17-gauge aluminum material provides a solid section for the slots, which helps brackets seat positively and reduces flex where shelves engage. Slots adjustable in 1/2 inch increments give consistent step spacing, so shelf moves can follow a predictable pattern from one cabinet or bay to the next. Stamped numbers along the pilaster tie directly to those increments, which lets installers or shop staff reference positions by number and reproduce layouts across multiple units. Pre-drilled holes at 6 inch on-center spacing guide fastener placement, helping keep standards straight and aligned, which keeps shelf brackets level and reduces leveling corrections later. Tying the product to the KV255 model designation also simplifies reorders, because the same slot pattern and performance class can be specified again when expanding or matching an existing install.
The 30 inch KV255 pilaster standard measures 30 inches long, 5/8 inch wide, and 3/16 inch deep, which keeps the track compact while still providing a defined channel for shelf supports.
The 255AL 30 pilaster standard uses 17-gauge aluminum, giving a substantial section that supports the heavy-duty rating and helps the slots resist distortion under bracket load.
Slots adjustable in 1/2 inch increments allow shelves to move in small, predictable steps, so storage space can be used efficiently without large wasted gaps between items.
BHMA Grade 1 compliant indicates the KV255 pilaster is built for demanding service, which supports use in heavily loaded or frequently adjusted shelving applications.
The 30 inch KV255 pilaster has pre-drilled screw or nail holes 6 inches apart on center, helping distribute load along the length while simplifying consistent fastening.
The recommended fasteners are KV255-8 nails, sold separately, which gives a specific reference when selecting nails that match the pilaster design.
The 30 inch KV255 heavy-duty aluminum pilaster standard in natural aluminum finish offers a compact, BHMA Grade 1 compliant track for adjustable shelving. The 5/8 inch wide, 3/16 inch deep profile, 1/2 inch slot increments, stamped numbers, and 6 inch on-center fastening pattern together support straightforward layout and repeatable results across cabinets, closets, or storage runs. Specifying the 255AL 30 part number ties your project directly to this performance level and finish for future expansion or matching work.
Sold In: 1 Each
