Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KV255 heavy duty steel pilaster standard describes a Knape and Vogt shelf standard that supports adjustable shelving layouts using matching supports. The 24 inch length matches many cabinet and closet openings, so installers can run rows of standards without cutting, which speeds layout on repetitive jobs. The 5/8 inch wide by 3/16 inch deep profile keeps the standard slim, helping it sit close to the case side and leave more usable shelf width in narrow cabinets. Steel standards made from 23-gauge high strength steel resist bending under normal residential and light commercial loads, supporting long-term straight, level shelving. The zinc finish provides a neutral metallic appearance that blends with many interior hardware finishes while helping the steel surface resist corrosion in typical indoor environments.
The 24 inch KV255 heavy duty steel pilaster standard installs vertically along cabinet or closet sides using the pre-drilled screw or nail holes spaced 6 inches on center, giving you an even pattern for fastening into wood or into framing members where available. The 5/8 inch wide profile provides a clear target area for fasteners while staying narrow enough to sit comfortably on typical cabinet side thicknesses. Slots adjustable in 1/2 inch increments run the working length of the standard, so once it is secured, you can set supports at the needed elevation without reworking the mounting. Stamped numbers next to slots help you match left and right standards at the same height, limiting the chance of a shelf rocking from uneven support points.
The 24 inch length of this KV255 heavy duty steel pilaster standard suits shorter cabinet interiors, utility cabinets, and sections of closet systems where the vertical span is limited, so the standard can run nearly the full height without trimming. The 5/8 inch wide by 3/16 inch deep profile fits along cabinet sides or closet panels that need to preserve interior width, letting shelves carry across without a large obstruction at the mounting line. BHMA Grade 1 compliance ties this standard to recognized performance criteria, making it suitable where consistent, tested hardware is preferred in shelving layouts. The zinc finish works well in settings where a neutral, metallic tone is acceptable, such as storage rooms, shops, or back-of-house cabinetry that uses other zinc or aluminum colored components.
Slots for supports adjustable in 1/2 inch increments give you a fine resolution when locating shelves, which helps match shelf heights across multiple cabinets or bays so long items sit flat. Stamped numbers along the standard provide a reference during installation and later adjustments, so relocating shelves to a specific number keeps alignment consistent without repeated measuring. Pre-drilled screw or nail holes spaced 6 inches on center structure your fastening pattern, letting you avoid guesswork about where to place fasteners and helping distribute load more evenly over the cabinet side or stud line. The 23-gauge high strength steel construction allows the standard to maintain its shape when supports and shelves carry typical loads, supporting long-term use without the standard deforming under everyday service. The zinc finish on the steel adds a protective surface that resists ordinary indoor moisture exposure, helping the standard maintain appearance and function over time in closets, cabinets, or garage storage areas.
The KV255 heavy duty steel pilaster standard measures 5/8 inch wide by 3/16 inch deep and 24 inches long, which suits many cabinet and closet interiors where a compact, full-height standard is needed.
Slots adjustable in 1/2 inch increments let you position shelf supports with fine height changes, so you can tailor spacing to stored items and keep shelf lines level across adjoining units.
Stamped numbers mark slot locations along the standard, helping you match left and right sides at the same setting and repeat specific shelf heights across multiple installations.
Pre-drilled screw or nail holes spaced 6 inches on center create a regular pattern for fasteners, spreading loads along the mounting surface and simplifying alignment with studs or cabinet sides.
BHMA Grade 1 compliant indicates the shelf standard meets a defined performance level recognized in the hardware industry, which supports using it in demanding shelving applications.
This shelf standard uses 23-gauge high strength steel with a zinc finish, providing structural support with a neutral metallic surface suited to typical indoor storage environments.
The KV255 heavy duty steel pilaster standard in 24 inch length and zinc finish gives you an adjustable shelving track built from 23-gauge high strength steel with BHMA Grade 1 compliance, so it fits projects that call for tested performance. The 5/8 inch wide by 3/16 inch deep profile, 1/2 inch adjustable slots, stamped numbers, and 6 inch on center mounting holes all work together to speed layout and support level shelves across cabinets, closets, and storage runs. For projects using Knape and Vogt standards and supports, this KV255 zinc finish model aligns with that system and offers a practical option when you need a compact, adjustable shelf standard.
Sold In: 1 Each
