Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
12" KV255 heavy-duty steel pilaster standard describes a Knape and Vogt shelf standard that supports adjustable shelving runs in cabinets, closets, or storage builds where a short, 12 inch length is required. The standard is part of the KV Model KV255 line, so it matches that system for profile and slot style, helping installers maintain consistency across different cabinet sections using the same series. The piece is made from steel standards described as 23-gauge high strength steel, which provides a robust support body for shelf clips while staying slim enough for tight casework. A zinc finish is specified, giving a hard metallic surface that works well in utility or shop environments where a neutral, corrosion-resisting finish is preferred. The 12 inch length fits shorter cabinet sides or localized reinforcement where a full-height standard is not necessary.
The pilaster is identified as KV Model KV255, tying it to a known shelf standard profile that installers can integrate into existing shop workflows. Dimensions of 5/8 inch width and 3/16 inch depth mean the standard nests neatly into typical cabinet side material without requiring excessive routing or cutting, which helps keep production time controlled. Pre-drilled screw or nail holes every 6 inches on center give an immediate fastening guide, so the installer can work down the run without separate marking. Recommended fasteners are stated as KV255-8 nails sold separately, indicating that nail-driven installation is common for this standard where rapid production work is important. Slots set at 1/2 inch increments provide the adjustment range needed to align shelves with face frames, doors, or adjacent units during final fit-out.
The Knape and Vogt 255 ZC 12 pilaster is a 12 inch long zinc finish steel standard that fits projects where a compact adjustable shelf run is required, such as shorter wall cabinets or sections above drawers. At 5/8 inch wide and 3/16 inch deep, it fits comfortably on common cabinet sides without crowding the opening, keeping the interior usable for wider shelves. The zinc finish creates a neutral metallic appearance that matches many storage environments, from shop cabinets to residential utility spaces, which simplifies design coordination. BHMA Grade 1 compliance positions this standard for heavy-duty storage locations where shelves may see substantial static loads. Because it is part of the KV255 family with a defined KV Model KV255 reference, shops already using that system can extend the same track profile into shorter cabinet bays while maintaining consistent hardware across a job.
The pilaster slots accept supports on 1/2 inch increments, giving installers a repeatable grid for shelf placement so they can quickly step shelves up or down to avoid hinges or hardware. Those 1/2 inch steps make it straightforward to match shelf elevations across adjacent cabinets, which is useful in long runs of wall units. Stamped numbers along the standard help installers read off heights directly, reducing the need for separate measurements each time a shelf is moved or duplicated on the opposite side. Pre-drilled screw or nail holes every 6 inches on center form a built-in template that limits wandering during fastening, which contributes to straight vertical alignment and smooth shelf engagement. With the body made from 23-gauge high strength steel, the standard provides a stable track that resists deformation under shelf clip pressure, supporting long-term alignment over repeated adjustments.
The 12 inch length suits shorter cabinet sides or localized shelf areas, allowing adjustable shelving in compact wall cabinets or sections above drawers without running a full-height standard.
The 5/8 inch width and 3/16 inch depth keep the pilaster close to the side panel, preserving interior shelf width while still providing enough body for secure shelf support engagement.
The 1/2 inch adjustable slots let installers fine-tune shelf heights, aligning shelves with doors, adjacent cabinets, or stored items without altering the cabinet structure.
Stamped numbers provide quick visual references, helping installers set matching shelf heights on left and right sides and repeat shelf layouts across multiple cabinets efficiently.
Pre-drilled holes every 6 inches on center give a ready-made fastening pattern, speeding layout and helping keep the standard straight along the cabinet side during fastening.
BHMA Grade 1 compliance indicates a heavy-duty performance classification, aligning the pilaster with demanding storage applications where long-term adjustability and support are important.
The 12" KV255 heavy-duty steel pilaster standard offers a 12 inch zinc finish track with 1/2 inch adjustable slots, BHMA Grade 1 performance, and a 5/8 inch by 3/16 inch profile. For cabinet, closet, or storage builds using the KV Model KV255 system, these details provide a compact, high strength steel standard that supports precise shelf layout. When a project calls for short adjustable shelving runs with stamped reference numbers and a predictable 6 inch on center fastening pattern, this Knape and Vogt 255 ZC 12 pilaster aligns well with that requirement.
Sold In: 1 Each
