Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3/4" KV256 steel shelf support clip gives a defined support point for shelves in systems using KV255 pilasters, so shelving positions line up consistently along Knape and Vogt standards. The brass finish shelf support clip presents a brass-colored bearing surface, which matters when the hardware edge is visible at cabinet or closet openings. The clip is designed for use with KV255 pilasters, so it ties directly into Knape and Vogt shelf standards and brackets layouts that already specify KV255. BHMA Grade 1 performance designation, when the clip is used with KV255, aligns this part with commercial-grade shelf standard systems where a tested grading reference is required. The shelf clip is described at 5/8" wide by 3/4" length, which sets the bearing footprint that actually contacts the shelf and affects how the load is carried along the pilaster. Wurth Baer Supply offers this clip to match existing Knape and Vogt hardware selections across woodworking projects.
This KV256 steel shelf support clip is specified for use with KV255 pilasters, so it fits into the Knape and Vogt shelf standards and brackets system that calls out KV255 components. The 5/8" wide by 3/4" length dimension describes the portion that supports the shelf, so installers know the approximate depth the shelf edge will rest on and how much side-to-side surface is available. BHMA Grade 1 performance reference, when the clip is paired with KV255 pilasters, places this combination in a recognized shelf standard category, which matters in institutional or commercial woodworking where a grade designation is written into the scope. The brass finish on a steel body provides a brass-colored appearance while retaining the underlying steel construction, which is relevant when matching visible hardware tones around adjustable shelving.
The 3/4" KV256 steel shelf support clip is used in shelving layouts built around KV255 pilasters, so it fits straight into Knape and Vogt shelf standards and brackets schemes using that pilaster profile. Because the clip is described as 5/8" wide by 3/4" length, it defines the resting pad under the shelf in cabinet, closet, or storage runs using KV255 standards. The brass finish creates a brass-colored support line at the shelf interface, which helps maintain a consistent visual band of brass-toned hardware beneath each shelf. BHMA Grade 1 status when this clip is used with KV255 pilasters aligns it with projects that call out BHMA Grade 1 shelf standards, so the installer can match the clip to the specified pilaster grade reference.
Using a shelf support clip that is designed specifically for KV255 pilasters keeps the shelf rest geometry consistent, which supports straight, repeatable shelf runs along Knape and Vogt standards and brackets. The 5/8" width and 3/4" length dimensions define how the shelf bears on the clip, which helps installers anticipate shelf edge seating and contact area when planning load paths in a cabinet or closet bay. The brass finish over steel provides a brass-colored contact point while retaining steel construction, which matters where visual coordination with other brass-finished components is part of the design. BHMA Grade 1 performance designation with KV255 pilasters connects this clip to a tested shelf standard grade, which supports selection in environments where documented grading is used to differentiate shelf hardware. The Knape and Vogt branding and 256 BR part number tie the clip back to a specific manufacturer reference, which supports replacement work where original KV255-based layouts need matching shelf support components.
The 3/4" KV256 steel shelf support clip supports shelves on KV255 pilasters, so shelves rest on a defined steel bearing surface within Knape and Vogt shelf standards and brackets layouts.
This KV256 shelf support clip is designed for use with KV255 pilasters, so it fits into shelving systems that specify Knape and Vogt KV255 shelf standards.
The shelf clip is described as BHMA Grade 1 when used with KV255 pilasters, which connects the combination to a recognized grade for shelf standard performance.
The 5/8" width and 3/4" length describe the shelf support surface, which defines how much area under the shelf edge is supported by the KV256 clip.
The brass finish on the steel shelf support clip creates a brass-colored contact point for the shelf while retaining the steel body, which matters where hardware edges remain visible.
Knape and Vogt part number 256 BR identifies this specific brass finish steel shelf support clip, which helps match or reorder the same component for KV255 pilaster systems.
The 3/4" KV256 steel shelf support clip with brass finish is specified for use with KV255 pilasters, so it matches Knape and Vogt shelf standards and brackets layouts calling out KV255. BHMA Grade 1 performance designation with KV255 and the defined 5/8" by 3/4" support surface give installers concrete sizing and grading information. For projects built around KV255 pilasters, choosing this 256 BR brass/steel shelf clip aligns shelf rests, visible finish, and grade reference with the Knape and Vogt system already in the design.
Sold In: 1 Each
