Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
84 inch KV255 pilaster standard from Knape and Vogt is a heavy-duty steel shelf standard designed to support adjustable shelving runs in closets, cabinets, and storage walls where long vertical coverage is needed. The standard uses 23-gauge high strength steel, giving installers a rigid track for shelf brackets that resists flexing under typical storage loads. Its almond finish provides a neutral, finished look that blends with common cabinet and closet interiors. The bar measures 5/8 inch wide by 3/16 inch deep, so it sits close to the wall while still giving enough profile for secure bracket engagement. Being 84 inches long allows one continuous vertical line of adjustment on tall pantry or wardrobe projects, which reduces layout time across multiple shelves. The standard is part of the KV Model KV255 system, so it works within a familiar shelf, closet, and garage organization hardware family.
The KV Model KV255 standard is drilled for screw or nail fastening, with holes spaced 6 inches on center, which supports a predictable pattern when fastening into studs or cabinet sides. Recommended fasteners are KV255-8 nails, sold separately, so installers can match the manufacturer-specified connection when nailing into wood. The 5/8 inch width and 3/16 inch depth allow the standard to sit neatly in a shallow dado or directly on a flat surface, keeping the profile tight while leaving enough room for bracket engagement. Slots that adjust in 1/2 inch increments give fine-tuned vertical movement, helping align shelves to hinges, countertops, and existing hardware. Because the bar runs 84 inches in length, it can serve tall units without splicing, which supports a clean visual line and reduces potential alignment problems between multiple shorter tracks.
The 255 ALM 84 standard belongs to the shelf standards and brackets class, making it suitable for shelf, closet, and garage organization layouts that rely on adjustable brackets. Its 84 inch length suits tall pantry cabinets, full-height closets, and utility spaces where multiple shelves must adjust over a large vertical span. The almond finish works well in light-colored cabinetry, laminated closets, and painted storage walls by providing a neutral tone that does not dominate the design. Being part of the Knape and Vogt KV255 model line allows installers already using that system to extend existing runs or match new work to prior installations. The 5/8 inch by 3/16 inch profile fits comfortably on cabinet sides without consuming excessive interior space, preserving usable shelf depth while still presenting solid engagement points for shelf supports.
BHMA Grade 1 compliance on this KV255 heavy-duty steel pilaster indicates it is engineered to a recognized performance standard, which supports repeatable results when used across multiple projects or banked installations. The stamped numbers along the standard turn height setting into a visual process rather than a tape-measure process, reducing measurement steps and helping maintain consistent shelf heights from cabinet to cabinet. With slots every 1/2 inch, installers can adjust shelf positions in small increments to accommodate plumbing, electrical, or stored equipment clearances without re-drilling. The pre-drilled holes at 6 inch spacing give a regular anchor pattern that helps keep the bar straight as it is fastened, limiting twist and reducing rework. Using 23-gauge high strength steel for the standard provides a sturdy backbone for brackets, which supports the long 84 inch span without relying on improvised reinforcement methods.
The 255 ALM 84 standard is 84 inches long, giving continuous adjustment along tall pantry, closet, or storage walls so multiple shelves can be placed anywhere within that vertical span.
The KV255 pilaster bar measures 5/8 inch wide by 3/16 inch deep, so it mounts close to the surface while still providing enough profile for secure support bracket engagement.
The KV Model KV255 standard has pre-drilled screw or nail holes 6 inches apart on center, which supports a regular fastening pattern and simplifies layout for studs or cabinet sides.
The KV255 standard uses recommended fasteners designated as KV255-8 nails, sold separately, which are specified by Knape and Vogt for nailing the standard into wood substrates.
Slots adjustable in 1/2 inch increments let shelves move in small steps, which helps line up shelf heights with doors, countertops, or stored equipment without major layout changes.
The 255 ALM 84 uses 23-gauge high strength steel with an almond finish, giving a strong support track with a neutral color suited to many closet and cabinet interiors.
The 84 inch KV255 heavy-duty steel pilaster standard in almond finish combines BHMA Grade 1 compliant construction, 1/2 inch adjustable slots, and clearly stamped numbers to support accurate, repeatable shelf layouts. Its 5/8 inch by 3/16 inch profile and 6 inch on-center mounting holes simplify fastening to cabinet sides or wall framing. When a tall, adjustable shelving run is required within the Knape and Vogt KV255 system, this 255 ALM 84 standard offers the length and adjustment pattern needed for efficient installation. Use it where a continuous vertical track and fine shelf adjustment are priorities for the project.
Sold In: 1 Each
